Omron NS - SETUP Setup Manual page 19

1. Zones with and without air conditioning not on the bridge or deck (e.g., boiler room)
2. Zones with and without air conditioning on the bridge (e.g., helm room)
3. Deck zone
4. Engine room zone (devices mounted on machinery that has strict vibration conditions,
such as diesel engines or air compressors)
5. Depends on the ship type. Emergency power supply devices on bulk carrier ships
carrying liquefied gas or hazardous chemicals.
• Certification Zones for Shipping Standards
Standard 1. Not on deck or bridge
No air
conditioning
NK No
LR No
DNV No
RINA No
BV No
GL No
ABS No
KR No
CR No
• Precautions for Compliance with Shipping Standards
1. Always install the NS-series PT in a control panel.
2. Install the NS-series PT in a control panel that has air conditioning.
3. Cover the entire surface of the NS-series PT with electromagnetic shielding material and
ground the control panel or operation panel with copper tape or other conductive tape.
4. Completely shield the gap at openings in the control panel or operation panel with a
gasket.
5. Completely shield the gap between the NS-series PT and the panel cutout with copper
tape or other conductive tape before securing the NS-series PT with the mounting
bracket.
6. Connect a noise filter to the power supply line connected between the 24-VDC and
0-VDC terminals.
Electromagnetic Shielding
Manufacturer
Model
Note: The transmission rate of the liquid crystal display will decrease by approximately
Noise Filter
Manufacturer
Model
Air No air
conditioning conditioning
Yes No
Yes No
Yes No
No No
Yes No
Yes No
Yes No
Yes No
No No
Seiwa Electric Mfg. Co. Ltd.
E09F-100, E09R13502P
50% when the electromagnetic shielding is mounted.
Cosel Co. Ltd.
TAH-06-683
2. Bridge
Deck
Air
conditioning
Yes
Yes
No
No
No
No
No
No
No
3. 4. 5. Ship type
Engine (e.g., bulk ship
(e.g.) with liquefied
gas)
No No
No No
No No
No No
No No
No No
No No
No No
No No
No
No
No
No
No
No
No
No
No
17