Omron GRT1-PNT - DATASHEET 2 Operation Manual page 68

Set-up the GRT1-PNT Configuration
Editing SmartSlice I/O Unit
Settings
56
Edit
This function allows the user to edit the current configuration.
1,2,3... 1 Double-click the first row (slot): a drop-down list appears, as shown in the
next figure.
2 Select the type of
the GRT1-PNT.
3 Repeat this
SmartSlice I/O Unit
Note 1 Not shown in the list is the first input word, containing the GRT1-PNT Unit status
word (refer to section 3-1-4 SmartSlice I/O allocation to the GRT1-PNT unit for an
explanation on this word). The GRT1-PNT DTM automatically inserts the status
word in the I/O Configuration.
2 The sequence of I/O Devices selected in the I/O Module tab must match the
sequence of physical devices attached to the GRT1-PNT. Otherwise I/O Communi-
cation will not be achieved.
3 The grouping of bit-sized SmartSlice I/O data into words is performed automatically
by the GRT1-PNT.
As an alternative to selecting the I/O Configuration manually, the complete I/O
Configuration can be uploaded from the GRT1-PNT Unit. To accomplish this,
perform the following steps.
1,2,3... 1 In the Network View, select the GRT1-PNT and right-click the mouse.
2 From the context menu, which pops up, select the option Go Online.
3 Press the Upload button. This will initiate an upload of all SmartSlice I/O
Information, i.e. I/O Configuration, Unit types and Unit parameters. From
this upload, the I/O Configuration in the Configuration list will be assembled
automatically.
Note Uploading may take some time, due to the amount of parameters.
After making the I/O configuration selection, the settings of individual
SmartSlice I/O Units can be set or changed. To do this, perform the following
steps.
SmartSlice I/O Unit
allocation for each other slot in which a
SmartSlice I/O Unit
will be present.
which is in this first slot, right next to
Section 3-4