Omron GRT1-PNT - DATASHEET 2 Operation Manual page 36

Installing the GRT1-PNT Unit
SmartSlice I/O System
Orientation
Installing a unit
Removing a unit
24
The system can be mounted in any of the following 6 directions.
Note Please note the vertical orientations are not recommended because the heat dissipa-
tion may limit product life time.
To install a PROFINET IO Communication Unit on the DIN Rail, press the Unit
onto the DIN Rail from the front. Press the Unit firmly until it clicks, indicating
that the Unit's DIN Rail Mounting Hooks have all locked onto the DIN Rail.
When the Unit is pushed onto the DIN Rail,
verify that the Mounting Hooks have locked.
Mounting Hooks
Use a standard screwdriver to release the DIN Rail Mounting Hooks at the top
and bottom of the Unit and pull the Unit straight away from the DIN Rail.
Section 2-3
Press firmly towards the DIN Rail.
Press firmly until you hear a click,
indicating that the Mounting Hooks
have locked.