Omron GRT1-PNT - DATASHEET 2 Operation Manual page 37

Installing the GRT1-PNT Unit
2-3-3 Connecting the PROFINET IO Unit and SmartSlice I/O Units
2-3-4 Connecting additional SmartSlice I/O Units
Connect the first SmartSlice I/O Unit to the PROFINET IO Communication
Unit by aligning the sides of the Units and sliding in the SmartSlice I/O Unit
from the front. Insert the Unit until it clicks, indicating that the Unit has locked
onto the DIN Rail. Normally it is not necessary to release the Unit's mounting
hooks when mounting the Unit.
Caution
Do not touch the connector on the Unit's base block.
Connect additional SmartSlice I/O Units by aligning the sides of the Units and
sliding in the next Unit from the front. Insert each Unit until it clicks, indicating
that the Unit has locked onto the DIN Rail. Normally it is not necessary to
release the Unit's mounting hooks when mounting the Unit.
Up to 64 SmartSlice I/O Units can be connected to one PROFINET IO
Communication Unit.
Slide the Slice I/O Unit toward the DIN Track from
the front. Insert the Unit until you hear a click,
which indicates that the Unit has locked on the Track.
It is normally not necessary to release the DIN Track
mounting hook when mounting the Unit.
Slide the Unit to the DIN Track from the front.
Insert the Unit until you hear a click, which indicates
that the Unit has locked on the Track.
It is normally not necessary to release the DIN Track
mounting hook when mounting the Unit.
Section 2-3
25