Visual Inspection System Protocol
Scene Switching and Positioning (F350) (Sequence No. 472)
This sequence switches to a designated scene No.
Send Data Word Allocation (2nd Operand of PMCR)
First word of
send data
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Note 1. If a scene No. is abnormal, CIO 28909 (if port A is used) or CIO 28913 (if port B is used) will turn ON.
2. Retry processing is not performed for this sequence.
3. Turn the Abort Bit ON and then OFF to end this sequence.
Inspection Execution and Character Inspection (F350)
(Sequence No. 473)
This sequence carries out one inspection and outputs the inspection results to a video monitor.
Send Data Word Allocation (2nd Operand of PMCR)
None.
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Character String Inspection and Character Inspection (F350)
(Sequence No. 474)
This sequence changes the inspection character string of a designated inspection area No. to a designated
character string.
Send Data Word Allocation (2nd Operand of PMCR)
First word of send
data
Receive Data Word Allocation (3rd Operand of PMCR)
None.
+0
Number of send data words
+1
(Undefined)
Offset
Contents (data format)
+0
Number of send data words
(4 digits BCD)
+1
Scene No. (2 digits BCD)
Number of send data words
+0
+1
(Undefined)
+2
+3
~
Offset
Contents (data format)
+0
Number of send data words
(4 digits BCD)
+1
Number of designated character
strings (4 digits BCD)
+2
Inspection area No.
(2 digits BCD)
+3 to
Number of designated character
strings (ASCII)
Scene No.
0002
00 to 15
Inspection area No.
Number of designated character strings
Designated character string
Designated character string
0004 to 0015
0 to 24
00 to 07
Appendix L
Data
~
Data
363