Omron CQM1H-SCB41 Operation Manual page 335

3Z4L Laser Micrometer Protocol
Sequence Communications sequence
No.
419 Statistic memory clear (3000-
series)
420 Statistic result request (3000-
series)
421 Memory switch set 1 (3000-
series)
422 Memory switch set 2 (3000-
series)
423 Simple AVG times set (3000-
series)
424 AVG move interval set (3000-
series)
425 AVG move (H) times set (3000-
series)
426 AVG move (L) times set (3000-
series)
427 Automatic detection set (3000-
series)
428 Automatic detection release
(3000-series)
429 Automatic detection list
request (3000-series)
430 3Z4L initialize (3000-series)
431 Measurement condition set
(4000-series)
432 Measurement condition
release (4000-series)
433 Measurement condition list
request (4000-series)
434 Single run measurement start
(4000-series)
435 Deflection measurement start
(4000-series)
436 Continuous measurement start
(scan) (4000-series)
437 Continuous measurement start
(interrupt) (4000-series)
438 Measurement termination
(4000-series)
439 Data request (4000-series)
440 Forced positive zero (4000-
series)
441 Forced negative zero (4000-
series)
320
name
Clears statistic processing memories of
program under display.
Requests statistic processing result.
Sets memory switches.
Sets memory switches.
Taking the simple average as the averag-
ing method, sets the averaging times per
measurement interval 4.
Taking the average move as the averaging
method, sets the measurement interval
number.
Taking the average move and high-speed
data output as the averaging method, sets
the averaging times per measurement
interval 4.
Taking the average move and low-speed
data output as the averaging method, sets
the averaging times per measurement
interval 4.
Sets work automatic detection function.
Releases the settings of work automatic
detection function.
Requests the settings of work automatic
detection function.
Clears the 3Z4L, sets the mm unit, sets the
memory unit, does not processes statis-
tics, and clears all statistic memory.
Sets measurement conditions.
Releases measurement conditions that
have been set.
Requests the measurement conditions that
have been set and other settings.
When the sample measurement condition
is from 1 to 999, performs a single run
measurement and requests the measure-
ment results.
Starts a deflection measurement.
Starts a continuous measurement. The
scan notification method is used for
receive data.
Starts a continuous measurement. The
interrupt notification method is used for
receive data.
Terminates continuous measurement.
Requests measurement data in the idle
measurement status or the latch data gen-
erated by the measurement command.
Sets the forced zero direction to positive
(+).
Sets the forced zero direction to negative
(–).
Function
Appendix K
Ladder interface
Send word Receive
allocation word
allocation
No No
No Yes
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
No No
No Yes
Yes No
Yes No
Yes No
No Yes
No Yes
No No
No Yes
No Yes
No *1
No
No Yes
No No
No No