Specifications; General Specifications - Omron CPM1A Operation Manual

Specifications

2-1

Specifications

2-1-1 General Specifications

Item
CPM1A-10CDT1-j(-V1)
Supply pp y AC type 100 to 240 VAC, 50/60 Hz
voltage l
DC type 24 VDC
Operating AC type 85 to 264 VAC
voltage voltage
DC type 20.4 to 26.4 VDC
range
Power con-
AC type 30 VA max.
sumption i
DC type 6 W max.
Inrush current 30 A max.
External
Supply 24 VDC
power
voltage
supply
(AC type (AC type
Output 200 mA (See note 2.)
only)
capacity
(See note
1.)
Insulation resistance 20 MΩ min. (at 500 VDC) between the external AC terminals and protective earth terminals
Dielectric strength 2,300 VAC 50/60 Hz for 1 min between the external AC and protective earth terminals, leakage
current: 10 mA max.
Noise immunity Conforms to IEC6100-4-4; 2 kV (power lines)
Vibration resistance 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
directions for 80 minutes each
(Time coefficient; 8 minutes × coefficient factor 10 = total time 80 minutes)
Shock resistance 147 m/s
Ambient temperature Operating: 0° to 55°C
Storage: –20° to 75°C
Humidity 10% to 90% (with no condensation)
Atmosphere Must be free from corrosive gas
Terminal screw size M3
Less than 100 W
Grounding
Power interrupt time AC type: 10 ms min.
DC type: 2 ms min.
(A power interruption occurs if power falls below 85% of the rated voltage for longer than the
power interrupt time.)
CPU Unit AC type 400 g max.
weight i h
DC type 300 g max.
Expansion I/O Unit Units with 20 I/O points:
weight Units with 8 output points:
Units with 8 input points:
Expansion Unit weight Analog I/O Unit:
Temperature Sensor Units:
CompoBus/S I/O Link Unit:
DeviceNet I/O Link Unit:
22
CPM1A-10CDR-j(-V1) CPM1A-20CDR-j(-V1)
CPM1A-10CDT-j(-V1) CPM1A-20CDT-j(-V1)
CPM1A-20CDT1-j(-V1)
2
three times each in X, Y, and Z directions
500 g max.
400 g max.
Note 1. Use the external power supply as the service power supply of input devices.
The power supply cannot be used for driving output devices.
2. If there is an overcurrent or short on the external power supply, the voltage of
the external power supply will drop and the PC will stop operation.
CPM1A-30CDR-j(-V1)
CPM1A-30CDT-j(-V1)
CPM1A-30CDT1-j(-V1)
60 VA max.
20 W max.
38 A max.
300 mA
600 g max.
500 g max.
300 g max.
250 g max.
200 g max.
150 g max.
250 g max.
200 g max.
200 g max.
Section 2-1
CPM1A-40CDR-j(-V1)
CPM1A-40CDT-j(-V1)
CPM1A-40CDT1-j(-V1)
2
in X, Y, and Z
700 g max.
600 g max.