Omron CPM1A Operation Manual page 104

Support Software Capabilities
Group Name
Utility
Data Area Lists
Change
Addresses
Print Lists
EPROM/Memory
Card
Program
Conversion
Create Library
File
Time Chart
Monitor
Instruction Trace
Data trace
Set Instructions
Retrieve/Save
Instr
PC Setup
Allocate UM
Network Support
Table
File Directory
Management
Copy File
Change File Name Changes the name of a specified file.
Delete File
LSS File
Management
Displays lists (such as used areas and cross-references) in accordance with the
contents of the user program in the system work area.
Globally changes bit and word addresses in the user program in the system
work area.
Prints lists, ladder diagrams, and mnemonics in accordance with the contents of
the user program in the system work area.
Writes, reads, and compares the user program between the PROM
Writer/Memory Card and system work area.
→
C500 C2000H:
Converts C500-family programs to C2000H programs.
→
C2000H CVM1:
Converts C2000H-family programs to CVM1 programs
Creates a library on a floppy disk or hard disk for use as an LSS data disk.
Accesses the time chart monitor data produced online. (C-series PCs only)
Accesses the instruction trace data produced online. (C-series PCs only)
Accesses the data trace data produced online.
Used to assign instructions to function codes in the instructions table and to
save and retrieve instructions tables to and from data disk files. (C-series PCs
only)
Used to save and retrieve expansion instruction sets to and from data disk files.
(C-series PCs only)
Used to set the PC operating parameters in the PC Setup and to save and
retrieve PC Setups to and from data disk files.
Used to allocate parts of the user memory area for used as a Fixed DM Area
and/or I/O Comment Area. (C-series PCs only)
Used to edit data link tables and routing tables for the SYSMAC NET and
SYSMAC LINK Systems.
Displays a file list. Wildcard names can be used to display only desired files.
Copies files on the same floppy disk or between different disks.
Deletes a specified file.
Used to change between LSS-style data files and DOS-style data files.
Description
Section 4-1
81