Cpm1A Functions - Omron CPM1A Operation Manual

CPM1A Features and Functions
DeviceNet I/O Link Units
Standard Peripheral Devices The CPM1A uses the same Programming Consoles and SYSMAC Support
Programming is Possible
Using the PT
Expansion Memory Unit
4
The CompoBus/S Network provides distributed CPU control based on a "PC +
compact PC" configuration, which is an improvement on the earlier distributed
I/O control based on a "PC + remote I/O" configuration. The distributed CPU
control makes equipment modular, so designs can be standardized, special
needs can be addressed, and modules can be replaced easily in the event of a
breakdown.
CompoBus/S Master Unit
(or SRM1 CompoBus/S Master Control Unit)
Master PC
Distributed CPU control
DeviceNet I/O Link Units can be connected to enable using the CPM1A as a De-
viceNet slave. Up to 32 internal input and 32 internal outputs points are sup-
ported for each Unit, and up to 3 Units can connected. DeviceNet application
allows networks to be constructed including devices from other manufacturers.
Software (SSS) as the C200H/HS, C200HX/HG/HE, CPM1, SRM1, and CQM1
PCs.
Programming operation is possible through the PT screen by using an OMRON
PT that has a built-in Programming Console function.
The CPM1-EMU01-V1 Expansion Memory Unit is a program loader for small-
size or micro PLCs. Using the CPM1-EMU01-V1, simple on-site transfer of user
programs and data memory is possible with PLCs.
Uploading
Download-
ing
EEPROM
CPM1A (Slave) CompoBus/S I/O Link Unit
CompoBus/S
SYSMAC
Section 1-1