Omron CPM1A Operation Manual page 136

Programming Example
! Caution
3. Clear the CPM1A's memory by pressing the CLR, SET, NOT, RESET, and
then the MONTR Key. Press the CLR Key several times if memory errors are
displayed.
NOT
SET
MONTR
4. Display and clear error messages by pressing the CLR, FUN, and then the
MONTR Key. Continue pressing the MONTR Key until all error messages
have been cleared.
MONTR
5. Press the CLR Key to bring up the initial programming display (program
address 00000). The new program can be written at this point.
Check the system thoroughly before starting or stopping the CPM1A to prevent
any accidents that might occur when the program is first started.
CLR
RESET
CLR
FUN
CLR
Section 4-4
113