Omron CJ2 - 02-2010 User Manual page 53

1 Overview
Improved Debugging
Reduced Effect on Cycle Time from Online Editing
The additional cycle time due to online editing has been reduced to approx. 1 ms, minimizing the
effects on equipment operation during debugging.
Fast, High-capacity Data Tracing
1
Up to 32 Kwords of data can be traced (8 time more than previously), with ample trigger conditions,
and data can be traced continuously for long periods of time.
Easy Setup Function for Data Tracing with CX-Programmer Version 9.0 or
Higher
With CX-Programmer version 9.0 or higher, data to be traced can be easily selected from lists.
When using the Pulse I/O Block with a CJ2M CPU Unit, the current pulse output frequency can be
calculated every 500 µs and the data can be traced.
Force-set/Reset Bits in Specified EM Area Banks
With CX-Programmer version 8.3 or higher, a parameter can be set to enable force-setting/resetting
bits in specified EM Area banks. (This function is supported only by CJ2H CPU Units with unit ver-
sion 1.2 or later and CJ2M CPU Units.)
CJ2 CPU Unit Software User's Manual 1-9