Omron CJ2 - 02-2010 User Manual page 359

The following file names are used for automatic transfer at startup.
File type
Program/net-
work symbol file
Parameter file
Data files
For example, specify the following start address and size for the DM Area.
• Allocated DM Area Words for Special I/O Units and CPU Bus Units
• DM Area:
CJ2 CPU Unit Software User's Manual
Automatic transfer at
Contents startup with parameter
User program AUTOEXEC.OBJ
• PLC name AUTOEXEC.STD
• PLC Setup
• Registered I/O tables
• Routing tables
• CPU Bus Unit Setup
Area
Allocated DM Area words AUTOEXEC.IOM
for Special I/O Units and
CPU Bus Units (D20000 to
D32767)
DM Area (D0 to D19999) ATEXECDM.IOM
EM Area AUTOEM@@.IOM
(@@: 00 to 18 hex)
10 CPU Unit Functions
Required?
file
Yes REPLACE.OBJ
Yes None
--- REPLACE.IOM
--- REPLACDM.IOM
--- RPLCEM@@.IOM
(@@:00 to 18 hex)
Automatic trans-
fer at startup
Required?
without parame-
ter file
Yes
---
---
---
---
10-29
10