A-1-32 Task Control Instructions; A-1-33 Model Conversion Instructions - Omron CJ2 - 02-2010 User Manual

A-1-32 Task Control Instructions
Instruction Mnemonic Code
TASK ON TKON 820
@TKON
TASK OFF TKOF 821
@TKOF
A-1-33 Model Conversion Instructions
Instruction Mnemonic Code
BLOCK XFERC 565
TRANSFER @XFERC
CJ2 CPU Unit Software User's Manual
Symbol/Operand
Makes the specified task executable.
TKON(820)
The specified task's task
N
number is higher than the local
task's task number (m<n).
N: Task number
Task m
Task n
Puts the specified task into standby status.
TKOF(821)
The specified task's task
N
number is higher than the local
task's task number (m<n).
N: Task number
Task m
Task n
Symbol/Operand
Transfers the specified number of consecutive words.
XFERC(565)
N
S
D
S+(W−1)
N: Number of
words
S: 1st source word
D: 1st destination
word
Function
The specified task's task number is
lower than the local task's task
number (m>n).
Task m
Becomes
executable
in that
cycle.
Task n
The specified task's task
number is lower than the local
task's task number (m>n).
Task m
In
stand- by
status
that
cycle.
Task n
Function
W words
to to
D+(W−1)
Appendices
Execution
Location
condition
Output Required
Becomes
executable
in the next
cycle.
Output Required
In
stand- by
status the
next cycle.
Execution
Location
condition
Output Required
A-75