Omron CJ2 - 02-2010 User Manual page 418

10 CPU Unit Functions
Synchronous Unit Stop Command Bit
Bit 15 in CIO 1200 in the Synchronous Data Refresh Area is the Synchronous Unit Stop Command
Bit. If this bit is turned ON, a command will be sent to stop the operation currently being preformed
by all Synchronous Units.
Synchronous Group Stop Command Bit
Bits 00 to 14 in CIO 1200 in the Synchronous Data Refresh Area are the Synchronous Group Stop
Command Bits. If one of these bits is turned ON, a command will be sent to stop the operation cur-
rently being preformed by all Synchronous Units for which the same bit is ON in the Synchronous
Group Stop Selection parameter setting the Synchronous Unit.
The Synchronous Group Stop Selection parameter settings in the axis parameters of a Position
Control Unit are given in the following table.
Name
Synchronous
Group Stop
Selection
10-88
Bit
00 These bits specify the operation of the Synchronous Unit for
each bit in CIO 1200 in the Synchronous Data Refresh Area.
OFF: Ignore bit 00.
ON: Stop if bit 00 turns ON.
01 OFF: Ignore bit 01.
ON: Stop if bit 01 turns ON.
02 OFF: Ignore bit 02.
ON: Stop if bit 02 turns ON.
: :
14 OFF: Ignore bit 14.
ON: Stop if bit 14 turns ON.
15 ---
Function
CJ2 CPU Unit Software User's Manual
Settings Default
OFF, ON OFF
OFF, ON OFF
OFF, ON OFF
OFF, ON OFF
--- ---