Omron CJ - REFERENCE MANUAL 02-2010 Reference Manual page 15

Function Support by Unit Version
Functions Supported for Unit Version 4.0 or Later
CS1-H CPU Units
Online editing of function blocks
Note This function cannot be used for simulations on the CX-Sim-
ulator.
Input-output variables in function blocks
Text strings in function blocks
New application Number-Text String Conversion Instructions:
instructions NUM4, NUM8, NUM16, STR4, STR8, and STR16
TEXT FILE WRITE (TWRIT)
CS1D CPU Units
CJ1-H/CJ1M CPU Units
Online editing of function blocks
Note This function cannot be used for simulations on the CX-Sim-
ulator.
Input-output variables in function blocks
Text strings in function blocks
New application Number-Text String Conversion Instructions:
instructions NUM4, NUM8, NUM16, STR4, STR8, and STR16
TEXT FILE WRITE (TWRIT)
CS/CJ/NSJ Series Instructions Reference Manual (W474)
CX-Programmer 7.0 or higher must be used to enable using the functions
added for unit version 4.0.
Function
Unit version 4.0 is not supported.
Function
User programs that contain functions supported only by CPU Units with unit
version 4.0 or later cannot be used on CS/CJ-series CPU Units with unit ver-
sion 3.0 or earlier. An error message will be displayed if an attempt is made to
download programs containing unit version 4.0 functions to a CPU Unit with a
unit version of 3.0 or earlier, and the download will not be possible.
If an object program file (.OBJ) using these functions is transferred to a CPU
Unit with a unit version of 3.0 or earlier, a program error will occur when oper-
ation is started or when the unit version 4.0 function is executed, and CPU
Unit operation will stop.
CS1@-CPU@@H
Unit version 4.0 or Other unit versions
later
OK ---
OK ---
OK ---
OK ---
OK ---
CJ1H-CPU@@H-R, CJ1@-CPU@@H,
CJ1G-CPU@@P, CJ1M-CPU@@
Unit version 4.0 or Other unit versions
later
OK ---
OK ---
OK ---
OK ---
OK ---
xvii