Chapter 1: Connections and Setup
Activating the Residential Voice Gateway
After installing the Residential Voice Gateway and turn it on for the first time (and each time the
modem is reconnected to the power), it goes through several steps before it can be used. Each of
these steps is represented by a different pattern of flashing lights on the front of the modem.
Note: All indicators flash once before the initialization sequence.
If all of the lights are flashing sequentially, it means the Residential Voice Gateway is
automatically updating its system software. Please wait for the lights to stop flashing. You
cannot use your modem during this time. Do not remove the power supply or reset the
Residential Voice Gateway during this process.
Illustrations contained in this document are for representation only.
23