Using Windows Me For Usb Connection - THOMSON TWG850 User Manual

Using Windows Me for USB Connection

Follow steps 6 through 9 if you have a Windows Me operating system:
6. Windows Me will briefly display the "Found New Hardware Wizard," and automatically
proceed to the "Add New Hardware Wizard".
Choose the "Automatic search for a better driver (Recommended)" option, and click "Next."
Note: If Windows Me does not recognize the presence of the Residential Voice Gateway, i.e., the
"Add New Hardware Wizard" did not automatically appear, your BIOS settings may not permit
USB and/or Plug-and-Play devices. Please contact your computer's customer service department.
7. The automatic search should find and install the driver for the "RCA or Thomson Digital
Cable Modem". Click on "Finish" to complete the process.
8. When the "System Settings Change" window appears, click "Yes" to restart your computer.
9. The Thomson Digital Cable Modem installation is now complete. To validate a proper
installation, perform the following instructions:
A. Click on the "Start" icon in the lower left-hand corner of your screen.
B. Select "Settings," followed by "Control Panel." The "Control Panel" window will appear.
C. Double-click on the "System" icon, and select the "Device Manager."
D. Scroll down the list until you come to "Network Adapters." Double-click on "Network
Adapters."
E. The "RCA or Thomson Digital Cable Modem" should exist. If "RCA or Thomson Digital
Cable Modem" does not exist, the Digital Cable Modem was NOT installed correctly.
Illustrations contained in this document are for representation only.
Chapter 1: Connections and Setup
17