Chapter 1: Connections and Setup
Chapter 1: Connections and Setup
Introduction
Wireless Voice Gateway Features
Support Multiple Provisioning Mode
4x Standard RJ-45 connectors for 10/100BaseT Ethernet with auto-negotiation and MDIS
functions
USB Connector for USB interface
Two RJ-11 Foreign Exchange Station (FXS) ports for IP telephony
Support simultaneous voice and data communications
Two simultaneous voice conversations in the different FXS ports with different CODEC: PCM
A-law, PCM-law, G.723.1, G.729, G.729a, G.729e, G.728, G.726, BV16 and BV32
Echo Cancellation
Voice Active Detection (VAD)
DTMF detection and generation
Comfort Noise Generation (CNG)
Support V.90 fax and modem services
Transparent bridging for IP traffic
RSA and 56 bit DES data encryption security
SNMP network management support
Remote operating firmware downloading
Support Web pages and private DHCP server for status monitoring
Clear LED display
Plug and Play
What's on the CD-ROM
Insert the Wireless Voice Gateway CD-ROM into your CD-ROM drive to view troubleshooting tips, the
internal diagnostics, and other valuable information.
Note: You might need to use the CD-ROM to install the USB driver if you are connecting via the USB
port.
Illustrations contained in this document are for representation only.
1