Table of Contents
Advertisement
Chapter 2: Web Configuration
Gateway – Advanced Web Page Group
Options
This page allows you to enable/disable some features of the Residential Voice Gateway.
Fig. 17
WAN Blocking prevents others on the WAN side from being able to ping your gateway.
With WAN Blocking enabled, your gateway will not respond to pings it receives,
effectively "hiding" your gateway.
Ipsec PassThrough enables IpSec type packets to pass WAN
LAN. IpSec (IP Security) is
a security mechanism used in Virtual Private Networks (VPNs).
PPTP PassThrough enables PPTP type packets to pass WAN
LAN. PPTP (Point to Point
Tunneling Protocol) is another mechanism sometimes used in VPNs.
Remote Config Management makes the configuration web pages in your gateway
accessible from the WAN side. Note that page access is limited to only those who know
the gateway access password. When accessing your gateway from a remote location,
your must use HTTP port 8080 and the WAN IP address of the gateway. For example, if
the WAN IP address is 157.254.5.7, you would navigate to
http://157.254.5.7:8080
to
reach your gateway.
Multicast Enable enables multicast traffic to pass WAN
LAN. You may need to enable
this to see some types of broadcast streaming and content on the Internet.
32
Hide quick links:
Advertisement
Table of Contents
