Usb Connection; Using Windows 2000 For Usb Connection - THOMSON TWG850 User Manual

USB Connection

If you do not want to use the CD-ROM, follow instructions 1 through 5 to connect the Residential
Voice Gateway to the USB port on your computer. Instructions must be followed in the order they
appear.
1. Connect one end of the coaxial cable to the cable connection on the wall, and the other end to
the CABLE jack on the Residential Voice Gateway.
2. Connect the plug from the AC power supply into the POWER AC ADAPTER jack on the
Residential Voice Gateway and plug the power supply into an AC outlet.
3. Insert the supplied Residential Voice Gateway CD-ROM. Wait momentarily for the CD window
display.
4. Close all open applications and dialog boxes, including the CD window.
Note: Some applications may interfere with your Residential Voice Gateway installation.
5. Connect one end of the USB cable to the USB port located on the back of your computer.
Connect the other end of the USB cable to the USB port on the Residential Voice Gateway.
Note: Use only the power supply that accompanied this unit. Using other power supplies may
damage the unit.
Next, you need to install the USB driver for your operating system.

Using Windows 2000 for USB Connection

Follow steps 6 through 14 if you have a Windows 2000 operating system:
Illustrations contained in this document are for representation only.
Chapter 1: Connections and Setup
13