Web User Interface; Source - Datavideo KMU-300 Instruction Manual

 On the command prompt, enter ipconfig/flushdns followed by ipconfig/release and
ipconfig/renew.

5.2 Web User Interface

By now, we have obtained the IP addresses of the PC and the NVS-31 MARK IV. Enter the NVS-
31 MARK IV's IP address into the address bar of a browser then hit the ENTER button. Login
by entering the user name as well as the password into a pop-up dialogue box as shown below.

Source

You will see the Source page immediately after logging into the NVS-31 MARK IV web UI. On
the Source page, you will see Input Information, Video Source, Audio Source, Resolution,
Frame Rate, Channels, Bits Per Sample and Sample Frequency.
Note: The NVS-31 MARK IV web UI does not update automatically so to learn the latest
device status, please refresh the page manually.
While monitoring streaming and recording, please update the page periodically regardless
of how you operate the device (using the device's physical buttons only or using the device's
Username: admin
Password: 000000
Click OK to login. Once logged in, the first
page that appears will be the Source page.
31