User Mems; Load Memory; Save Memory; Load Clip - Datavideo SE-650 Instruction Manual

3. In the Load Still sub-option, first select the still picture that you would like to load (Still Num).
The still picture preview is shown in the row right below the Load Still row.
4. Select Load to load the still picture to one of the following destinations:
• Still 1
• Still 2
• Input 4
• Input 3
• Input 2
• Input 1

4.7 User Mems

In this option, the user is allowed to load previously saved settings and save the currently configured
settings.
Advanced mode options
User Mems
See section 5.4 for detailed information on how you can import and load clips and user memory
presets to the switcher.

4.7.1 Load Memory

Use the up/down arrow to scroll to the desired memory location and load the saved setting by
selecting "Load".
Note: The user can also press one of the USER memory shortcut buttons (1-3) on the control panel as
a quick way of loading those previously saved User configurations.

4.7.2 Save Memory

Use the up/down arrow to scroll to the desired memory location and save the current setting by
selecting "Save".

4.7.3 Load Clip

In this sub-option, use the Up/Down arrows on the physical keyboard of the switcher to browse the
clip files. Once "Load" is pressed, the selected clip will be loaded into the Still 2 window and replace
the previously displayed video or image.
Note: The SE-650 comes with pre-loaded clip files. The SE-650 also allows the user to import
customized clip files. It is recommended to use 32-bit with Alpha png format.
Save Still
Grab Still
Freeze 1
4
Load Mem Memory
Save Mem Memory
Load Clip
Save Still 1
Grab Still 1
Live 2
Live
13
13
Load Clip
Thumbnail
Thumbnail Picture
Picture - 1
39
Still Num
Live 3
Load
Save
0
Thumbnail
Picture + 1
10
Live