Figure 71. Removing the M.2 NVMe SSD
4. If not installing the BOSS-N1 card carrier, align and push the BOSS-N1 card carrier blank into the BOSS-N1 module to fill the
empty BOSS-N1 card carrier slot.
Figure 72. Installing the BOSS-N1 card carrier blank
Next steps
Replace the BOSS-N1 module
Installing the BOSS-N1 card carrier
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure that is listed in
3. If installed,
remove the front
Safety instructions
.Before working inside your system
bezel.
.
Installing and removing system components
105