Table of Contents
Advertisement
Figure 78. Removing a power supply unit
Next steps
Replace the PSU
or
install the PSU
Installing a power supply unit
Prerequisites
1. Follow the safety guidelines listed in the
2. For systems that support redundant PSU, ensure that both the PSUs are of the same type and have the same maximum
output power.
NOTE:
The maximum output power (shown in watts) is listed on the PSU label.
3.
Remove the PSU
blank.
Steps
Slide the PSU into the PSU bay until the release latch snaps into place.
110
Installing and removing system components
blank.
Safety
instructions.
Advertisement
Table of Contents
