The table lists the available After Point Of Sale [APOS] kits.
Table 65. Upgrade kits
Kits
Memory modules
SSDs
GPU
Processors
Heat sink
Storage controller cards
HBA
Network cards
Power supplies
Cables
Bezel
Power cords
BOSS N1
Topics:
•
BOSS-N1 module kit
•
GPU kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 NVMe SSDs.
Before you begin the installation or removal process, follow the
instructions.
Table 66. BOSS-N1 module kit components
Components in kit
BOSS-N1 controller card module
BOSS-N1 card carrier
M.2 NVMe SSD
M.2 NVMe SSD capacity label
BOSS-N1 card carrier blank
M3 x 0.5 x 4.5 mm screws
BOSS-N1 signal cable for mother board (360 mm)
BOSS-N1 power cable for mother board (340 mm)
Related links to service instructions
See
Installing the memory module
See
Installing the SSDs
See
Installing the GPU
See
Installing the processor
See
Installing the heat sink
See
Installing the expansion card into the expansion card slots
See
Installing the power supply units
See
Cable routing
See
Installing the bezel
N/A
See
Installing an BOSS N1 module
safety guidelines
T360 (quantity)
1
1 or 2*
1 or 2*
†
1 or 2
1
1
1
1
Upgrade Kits
and
before working inside the system
Upgrade Kits
8
129