Supervisor level
Delay start
The delay start (timer) can be activ-
ated or deactivated.
- Factory default: Off
- On
SmartStart
The function to delay start changes
when the SmartGrid setting is activ-
ated. The period of time in which the
drying programme will start automatic-
ally is then shown in the display:
SmartStart by, SmartStart in, or
SmartFinish by.
The programme is started via an ex-
ternal signal.
The time period can be defined up to
24 hours. During this period, the tumble
dryer waits for an external signal. If no
signal is sent during the defined period,
the tumble dryer starts the drying pro-
gramme once the defined period of time
has elapsed.
Memory
The tumble dryer saves the settings
that were last selected for a drying
programme (drying stage and/or extra
option, or the duration for some pro-
grammes).
- Factory default: Off
- On
96
Temperature unit
You can select the unit for the temper-
ature display.
- Factory default: °C / Celsius
- °F / Fahrenheit
Weight unit
You can decide whether load quanti-
ties are displayed in "kg" or "lbs".
- Factory default: kg
- lb
Logo
You can choose whether the "Miele
Professional" logo or your own logo
appears in the display.
For the setting
Controls
,
Laundrette Logo
Laundrette Logo int. time
or
Laundrette Logo ext. time
lected.
- Miele Professional logo
- Customer logo
- Marine logo
Supervisor code
You can alter the access code to the
Supervisor level.
Enter the existing code.
Enter a new code.
, the option
must be se-