Payment System; Setting For Payment Systems; F-Back Signal To Pay System - Miele PDR 908 HP Operating And Installation Instructions

Payment system

The XCI-AD or XCI box accessory unit
is required to connect a payment sys-
tem.

Setting for payment systems

If you wish to change the settings after
the commissioning process, please con-
tact Miele Service.
You would like to connect a payment
system.
- No payment system
The following settings are skipped
and initial commissioning can be
completed.
- Programme operation
The machine is operated using a coin
box. The user purchases a pro-
gramme.
- Timed operation
The tumble dryer is coin-operated us-
ing a time meter. The user purchases
a time-controlled programme.
- Timed operation with pulse counter
For payment systems where the us-
age time is increased each time a
coin is inserted.
- COM module
The machine is operated by a central
control unit
Supervisor level

F-back signal to pay system

Setting the feedback signal for the coin
box.
- Factory default: Off
- End of programme
The feedback signal is sent at the end
of the programme.
- Release of the start button
The feedback signal is sent when the
start button is released.
- Start and end of programme
The feedback signal is sent at the
start and end of the programme.
- Programme running
The feedback signal is sent constantly
between the start and end of the pro-
gramme.
- Process air temperature
The feedback signal is sent depend-
ent on the temperature if the temper-
ature of the process air is equal to or
higher than the set temperature.
109