Miele PDR 914 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. PDR 914
  6. Operating and installation instructions

Miele PDR 914 Operating And Installation Instructions

Hide thumbs Also See for PDR 914:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and installation instructions
Commercial tumble dryers
PDR 914/918/922/928/944
To avoid the risk of accidents or damage to the
en-GB
machine, it is essential to read these instruc-
tions before it is installed and used for the first
time.
M.-Nr. 11 840 480

Advertisement

Table of Contents
loading

Related Manuals for Miele PDR 914

Summary of Contents for Miele PDR 914

  • Page 1 Operating and installation instructions Commercial tumble dryers PDR 914/918/922/928/944 To avoid the risk of accidents or damage to the en-GB machine, it is essential to read these instruc- tions before it is installed and used for the first time. M.-Nr. 11 840 480...

  • Page 3: Table Of Contents

    Contents Caring for the environment .................... Warning and Safety instructions ................... Appropriate use ......................... Foreseeable misuse......................Technical safety......................... 10 Gas-heated tumble dryers .................... 11 Correct use........................12 Accessories ........................13 Operating the tumble dryer .................... 14 Control panel ........................14 Sensor controls and touch display with sensor controls ..........
  • Page 4 Contents Timer ..........................27 Prerequisite for setting the timer ................... 27 Setting the timer ......................27 Cleaning and care ......................28 Cleaning the fluff filter ....................... 28 Cleaning the drum and the outside of the casing ............. 29 Customer Service Department ..................30 Contact in case of malfunction ..................
  • Page 5 Additional fan ........................ 48 Pressure sensor......................48 Peak load signal ......................48 Peak load prevention..................... 49 COM module selection....................49 Availability of Miele digital products ................49 WiFi / LAN ........................49 Network time ......................... 50 Remote .......................... 50 RemoteUpdate ......................50 SmartGrid ........................
  • Page 6 Contents EU declaration of conformity ..................53...

  • Page 7: Caring For The Environment

    Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the man- ufacturing process and also reduces the amount of waste in landfill sites.

  • Page 8: Warning And Safety Instructions

    If using, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for dam- age resulting from incorrect or improper use or operation.

  • Page 9: Foreseeable Misuse

    Foreseeable misuse  Do not make any alterations to the tumble dryer, unless authorised to do so by Miele.  Do not lean on the tumble-dryer door. Otherwise, the tumble dryer may tip over, causing injury to yourself or others.

  • Page 10: Technical Safety

    The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a specialist. Miele cannot be held liable for the consequences of an inadequate earthing system.

  • Page 11: Gas-Heated Tumble Dryers

    Ensure that no closeable door, sliding door or an oppositely hinged door is installed that would hinder the drum door being opened in any way.  If the mains connection cable is faulty it must always be replaced by a Miele authorised technician to protect the user from danger. Gas-heated tumble dryers ...

  • Page 12: Correct Use

    Warning and Safety instructions - Open all windows and doors immediately. - Close the gas shut-off device on the gas meter or the main gas shut-off device immedi- ately. - If there is the smell of gas in a room, never enter the room with a naked flame. - Do not light matches or lighters.

  • Page 13: Accessories

    Accessories  Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated.  Miele cannot be held liable for damage caused by non-compliance with these Warn-...

  • Page 14: Operating The Tumble Dryer

    Operating the tumble dryer Control panel Sensor control  For selecting the current user language At the end of the programme, the language is automatically reset to the language set at the Supervisor level. Sensor control  Takes you back one level in the menu. Touch display Sensor control /...

  • Page 15: Sensor Controls And Touch Display With Sensor Controls

    Operating the tumble dryer Sensor controls and touch display with sensor controls The sensor controls ,  and Start/Stop and the sensor controls in the display re- spond to finger tip contact. Every touch of a sensor control is confirmed with an audible keypad tone.

  • Page 16: Setting Numerical Values

    Operating the tumble dryer To scroll through the menu, place your finger on the touch display and move it left or  right. The orange scroll bar in the bottom display area shows that there are further options to choose from. To select the required drying programme, touch the programme name with your finger.

  • Page 17: Pull-Down Menu

    Operating the tumble dryer The numeric block will appear.  Clock display 12:00  To enter the numerical value, touch the numbers on the right-hand side and then confirm  with OK. Pull-down menu The pull-down menu can be used to display information (e.g. about a drying programme). ...

  • Page 18: Initial Commissioning

    Some settings can only be modified during the initial commissioning process. After that, they can only be changed by the Miele Customer Service Department. These settings are also described under “Supervisor level”.

  • Page 19: Setting The Date

    Initial commissioning Display brightness Darker Brighter Touch the segment bar for the required level of brightness.  The selected level of brightness is represented by the length of the segment bar. Confirm with the OK sensor control.  The display will change to the next setting. Setting the date Date September...

  • Page 20: Selecting Programme Packages

    Initial commissioning Selecting programme packages You can select various programmes from the programme packages. Any programmes already active are highlighted in orange. Programme packages 11:02 Label Standard Cottons  Cottons Woollens Cottons PRO Minimum iron Delicates Swipe to the left with your finger until you reach a programme that is not highlighted in ...
  • Page 21 Initial commissioning Timed drying cool air Touch the  programme.   Overview 11:02  Weight Duration 0:10 Timed drying cool air Drying temp.  0:10 Without heat Touch the Duration  sensor control.  Place your finger on the number that you want to change and move your finger upwards ...

  • Page 22: Drying

    Drying 1. Notes on correct laundry care Washing Heavily soiled laundry must be washed particularly thoroughly. Use sufficient detergent and select a high wash temperature. If in doubt, wash the items several times. New, coloured items must be washed thoroughly and separately. Do not dry these items with light coloured garments.

  • Page 23: Loading The Tumble Dryer

    Drying 2. Loading the tumble dryer Loading laundry into the tumble dryer Preventing textile damage. Before loading, read chapter “1. Notes on correct laundry care” first. Open the door.  Load laundry into the tumble dryer.  Risk of damage with laundry getting trapped. Laundry can be damaged by getting trapped when closing the door.

  • Page 24: Selecting Programme Settings

    Drying  11:02    Programmes Favourites Supervisor Help Touch the   Programmes  sensor control.   Programmes 11:02 Cottons  Cottons Woollens Cottons PRO Minimum iron Delicates With your finger, swipe to the left until you reach the required programme. ...

  • Page 25: Selecting Extra Options

    Drying Selecting extra options The drying programmes can be augmented with various Extras. Some Extras can only be selected for certain drying programmes.  11:02 Overview  Weight Drying level Normal Cottons Drying temp.  Extras 0:57 °C not selected Extras Touch the  sensor control.

  • Page 26: Calling Up Current Programme Parameters

    Drying Calling up current programme parameters During the programme running time, you can use the pull-down menu to view the paramet- ers of the current drying programme (e.g. drying level, load capacity, selected Extras, dry- ing temperature).  Status  11:02 ...

  • Page 27: Removing The Laundry

    Drying If the Anti-crease * extra has been selected, the drum continues to rotate in intervals after the end of the programme. This reduces creasing if the laundry cannot be removed straight away. * The Anti-crease function is switched off as the factory default setting and can be activ- ated in the Supervisor level.

  • Page 28: Cleaning And Care

    Cleaning and care Cleaning the fluff filter  Risk of fire if the tumble dryer is operated without a fluff filter. If there is no fluff filter, the air channels, heating elements and vent ducting can become clogged during drying and may catch fire. The fluff filter must not be removed for cleaning.

  • Page 29: Cleaning The Drum And The Outside Of The Casing

    Cleaning and care Cleaning the drum and the outside of the casing  Risk of death due to electric shock. The tumble dryer must be completely disconnected from the power supply before per- forming cleaning or maintenance work. Before starting cleaning or maintenance work, always switch off the tumble dryer at the main switch (on site).

  • Page 30: Customer Service Department

    Customer Service Department Contact in case of malfunction In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document.

  • Page 31: Installation

    *INSTALLATION* Installation Installation requirements The tumble dryer must only be installed and commissioned by Miele Customer Service Department or an authorised dealer.  The tumble dryer must be installed in accordance with all relevant regulations and standards.  The dryer must only be operated in a room that has sufficient ventilation and which is frost-free.
  • Page 32 *INSTALLATION* Installation PDR 514/518/522/914/918/922 PDR 528/544/928/944 1400 mm 1640 mm 906 mm 1206 mm PDR 514/914: 852 mm PDR 528/928: 1018 mm PDR 518/918: 1035 mm PDR 544/944: 1384 mm PDR 522/922: 1164 mm To facilitate any future maintenance work, a maintenance corridor with a width of at least  500 mm must be set up behind the machine and must be accessible at all times. The distance between the machine and any walls must not fall below the specified minimum values.

  • Page 33: Securing The Machine

    If more than one voltage is specified on the data plate, the tumble dryer can be conver- ted for connection to the relevant input voltage. This conversion must be performed by the Miele Customer Service Department or by an authorised dealer. During the conversion, the wiring instructions given on the wiring diagram must be followed.

  • Page 34: Supply Air/Exhaust Air

    *INSTALLATION* Installation The tumble dryer can either be hard-wired or connected using a plug-and-socket connec- tion in accordance with IEC 60309-1. For a hard-wired connection, an all-pole isolation device must be available at the installation site. An isolation device is a switch which ensures a contact opening of more than 3 mm. These include circuit breakers, fuses and contactors (IEC/EN 60947).
  • Page 35 *INSTALLATION* Installation If the gas family is changed, a conversion kit must be requested from the Miele Cus- tomer Service Department (please specify the appliance type, serial number, gas family, gas group, gas connection pressure and country of installation). Follow the installation in- structions.

  • Page 36: Optional Accessories

    Optional accessories  Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. XCI box The optional XCI box allows external hardware from Miele and other suppliers to be con- nected to the Miele Professional machine.
  • Page 37 Optional accessories valid at the time and any further information can be accessed locally by IP using a web browser (https://<IP address>/Licenses). The liability and warranty arrangements for the open source licences displayed at this location only apply in relation to the respective rights holders.

  • Page 38: Supervisor Level

    Be careful when entering a new code. You will need to inform Miele Service if you forget your new code. Miele Service will have to reset the code. Make a note of your new code and store it in a safe place.

  • Page 39: Set Languages

    Supervisor level International 6 languages are available. The  sensor control is not active. Note the setting Set lan- guages Language setting The  sensor control can be used to select a language. All languages are available (factory default). You can change the order of the first 4 languages. These slots are allocated to the most commonly used languages.

  • Page 40: Volume

    Supervisor level The date can be shown starting with the day, month or year. - Date The date is set. Volume The volume for various sounds can be changed. The volume can be changed. - Finish tone - Keypad tone - Welcome tone - Fault alarm The acoustic signal that indicates a fault can be switched off.

  • Page 41: Machine" Off Status

    Supervisor level Logo (10 min.) Not curr.prog. The display will remain on during the programme sequence but the logo will light up 10 minutes after the end of the programme. On after 10 min. - Factory default: The display is switched off after 10 minutes. On (30 min.) Not curr.prog.

  • Page 42: Logo

    Supervisor level - lb Logo You can choose whether the “Miele Professional” logo or your own logo appears in the display. Controls Launderette ext. (12 prog) Launderette basic int. time For the setting , the option Laundrette basic ext. time must be selected.

  • Page 43: Programme Packages

    Supervisor level 12 programmes are available. Under Favourite programmes, you can set which 12 programmes to select/modify. The first 3 programmes can be selected directly. The remaining programmes are selec- ted via another list. - Laundrette basic ext. time 4 time programmes* with different temperature levels are time-controlled via an external payment system.

  • Page 44: Special Programmes

    Supervisor level Confirm using the Save sensor control.  Your selection is now active. Special programmes You can put together 5 special residual moisture or time-controlled programmes and as- sign your own programme names. First, enter the programme name. Select the special programme you want to change. ...

  • Page 45: Sort Programmes

    Supervisor level Anti-crease Drum rotation, main direction – 0–500 seconds – Drum reversal 0–500 seconds Pause – 100–3000 seconds Sort programmes Programmes can be moved within the programme list and in the Favourites list. - Factory default: Off - On Moving programmes/favourites You can move/change the order of the programmes (programme menu – single option list). You can also move and change the order of the favourites that you edit in the Supervisor level under Favourite programmes.

  • Page 46: Further Cooling

    Supervisor level Factory default: normal Machine iron The residual moisture in drying level can be set in 11 levels from 16 % (dryer) to 26 % (damper). Factory default: 20 % Further cooling Before the end of the programme, the temperature of the dried laundry is monitored and the cooling phase at the end of the programme is extended if necessary.

  • Page 47: Clean The Filters

    External applications External exhaust flap External hardware is connected via the Miele XCI box. The time delay between the external exhaust air flap's activation point and the switch-on time for the drum/fan motor is regulated.

  • Page 48: Additional Fan

    The tumble dryer may only be operated with a peak-load system if this system is connec- ted to the tumble dryer via the Miele XCI box. - Factory default: no function - Peak load with 230 V...

  • Page 49: Peak Load Prevention

    An XKM module or RS232 module is inserted into the module slot. Availability of Miele digital products The ability of Miele digital products depends on the availability of the services in your country. The different services are not available in all countries.

  • Page 50: Network Time

    WiFi network. Miele’s RemoteUpdate function can only be used if the tumble dryer is connected to a WiFi network and you have an account in the Miele Professional app. The tumble dryer must be registered in the app.

  • Page 51: Smartgrid

    You can view information here. Copyrights and licences For the purpose of operating and controlling the machine, Miele uses proprietary or third- party software that is not covered by open source licensing terms. These items of soft- ware/software components are protected by copyright. The copyrights held by Miele and third parties must be respected.

  • Page 52: Technical Data

    Technical data PDR 914 PDR 918 PDR 922 PDR 928 PDR 944 Height 1400 mm 1400 mm 1400 mm 1640 mm 1640 mm Width 906 mm 906 mm 906 mm 1206 mm 1206 mm Depth 852 mm 1035 mm 1162 mm 1018 mm 1385 mm Depth with door open 1456 mm 1639 mm 1768 mm 1622 mm 1988 mm Drum volume 250 l 325 l 400 l 500 l 800 l Maximum load size (dry weight) 14 kg...
  • Page 53 EU declaration of conformity Miele hereby declares that this PT 013 tumble dryer complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following Internet addresses: - Under “Products”, “Download” at www.miele.de/professional/index.htm - Or go to http://www.miele.de/professional/gebrauchsanweisungen-177.htm and enter...
  • Page 54 United Kingdom Malaysia Miele Sdn Bhd Miele Co. Ltd., Fairacres, Marcham Road Suite 12-2, Level 12 Abingdon, Oxon, OX14 1TW Menara Sapura Kencana Petroleum Professional Sales, Tel: 0845 365 6608 Solaris Dutamas No. 1, Jalan Dutamas 1 E-mail: professional@miele.co.uk 50480 Kuala Lumpur, Malaysia Internet: www.miele.co.uk/professional...

This manual is also suitable for:

Pdr 918Pdr 922Pdr 928Pdr 944

Table of Contents