Cleaning The Plinth Filter - Miele PDR 908 HP Operating And Installation Instructions

Cleaning and care

2. Cleaning the plinth filter

The filter in the plinth is behind the fluff
filter flap on the bottom left.
Normal use
Always clean the appliance whenever
prompted to do so in the display. Vari-
ous messages can be displayed:
Clean the fluff filter and rinse the plinth fil-
ter.
Rinse the fluff filter and the plinth filter.
Check the airways.
Continuous operation
Clean once a day and also when the
prompt appears in the display.
Cleaning the filter insert in the plinth
The filter insert is visible in the plinth
after removing the fluff filter. Clean the
filter insert as well.
 To delete the message: touch the
sensor control.
OK
54

Damage caused by insufficient
cleaning or by operation with a worn,
damaged filter in the plinth.
There is insufficient flow of air and
heat in the heat exchanger due to
clogging. This requires a visit from
the Service department.
This can be avoided by following the
advice in these operating instruc-
tions.