Machine Off Status; Delay Start; Memory; Temperature Unit - Miele PDR 914 Operating And Installation Instructions

Supervisor level

Machine off status

In order to save energy, the tumble dryer will switch off automatically after the end of the
programme or if no further selection is made. You can change this setting.
Changing this setting leads to increased energy consumption.
- No switch off
- Factory default: Switch off after 15 minutes
- Switch off after 20 minutes
- Switch off after 30 minutes

Delay start

The delay start (timer) can be activated or deactivated.
- Factory default: Off
- On

Memory

The tumble dryer saves the settings that were last selected for a drying programme (drying
stage and/or extra option, or the duration for some programmes).
- Factory default: Off
- On

Temperature unit

You can select the unit for the temperature display.
- Factory default: °C
- °F

Weight unit

You can decide whether load quantities are displayed in "kg" or "lbs".
- Factory default: kg
- lb

Change code

You can alter the access code to the Supervisor level.
Enter the current code.

Enter a new code.


Programme selection

Controls

You can select whether the tumble dryer is operated as a "launderette" machine. Short-
cuts are the easiest way to operate the machine. Operating staff are unable to change pre-
set programmes.
Tip: Start by configuring all necessary settings and changes to the tumble dryer before ad-
justing any of the options below.
30