Miele PDR 908 HP Operating And Installation Instructions page 71

Heat-pump dryer
Table of Contents

Advertisement

Message
Rinse the fluff filter
and the plinth filter.
Check the airways.
Cause and remedy
You have attempted to dry only a few items of varying
size.
A smaller item has been sucked into the loading area
in the door. It is clogging the holes in the laundry de-
flector.
 To delete the message: touch the
trol.
 Open the tumble dryer door.
 Remove the item that is blocking the holes.
 Always dry small, individual items together with
larger items.
If you are able to exclude all this, the system has been
clogged by fluff or detergent residue.
The system has been clogged by fluff or detergent
residue.
 Clean all fluff filters and air channels.
 Check whether the fluff filters in the loading area
and plinth are free from damage and in good work-
ing order.
 If you have removed the plinth filter, also check the
filter insert behind it. Clean the filter insert if ne-
cessary.
 If you have removed the filter insert, also check the
heat exchanger behind it. Clean the heat exchanger
if necessary.
Please see "Cleaning and care" for notes on cleaning.
Fluff filters that are damaged, misshapen or can no
longer be cleaned must be replaced with new ones.
 To delete the message: touch the
trol.
Problem solving guide
OK
OK
 sensor con-
 sensor con-
71

Advertisement

Table of Contents
loading

Table of Contents