Selecting Delay Start - Miele PDR 307 HP CC Operating And Installation Instructions

Selecting delay start

Delay start must be activated in the
supervisor level to allow it to be selec-
ted. In this case, one of these 3 sym-
bols also lights up in the display: ,
, .
Cottons
Normal

 Touch the sensor control with the
clock symbol.
Depending on the delay start settings in
the supervisor level, different delays in
15-minute intervals can be selected:
- The programme finish time:
at
- The programme start time:
- The time to wait until the programme
starts:
 Start in
The maximum delay start period is 24
hours. The left-hand side of the display
shows what you are able to enter.


2
Start at

 Touch the  or  sensor controls to
select the hours and/or minutes.
 Touch the sensor control.
OK
If the delay start time is set to
or , the current times will be
at  Start at
displayed.
4. Selecting programme settings
1:43
 
 Finish
 Start at

: 15
h

OK
 Finish
 Touch the
The start delay begins when the pro-
gramme starts.
Changing/cancelling delay start
Before the programme starts
 Touch the sensor control with the
clock symbol.
h
 You can change or delete the time.
After the programme has started
 Touch the Start/Stop sensor control.
 You can either cancel the programme
or start it straight away.
sensor control.
OK
31