Miele PDR 908 HP Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. PDR 908 HP
  6. Operating and installation instructions

Miele PDR 908 HP Operating And Installation Instructions

Heat-pump dryer
Hide thumbs Also See for PDR 908 HP:
Table of Contents

Advertisement

Quick Links

Operating and installation
instructions
Heat-pump dryer
Always read the operating instructions before setting up, installing,
and commissioning the appliance. This prevents both personal injury
and damage to the machine.
en-CA
M.-Nr. 11 770 760

Advertisement

Table of Contents
loading

Related Manuals for Miele PDR 908 HP

Summary of Contents for Miele PDR 908 HP

  • Page 1 Operating and installation instructions Heat-pump dryer Always read the operating instructions before setting up, installing, and commissioning the appliance. This prevents both personal injury and damage to the machine. en-CA M.-Nr. 11 770 760...

  • Page 2: Table Of Contents

    Contents Caring for the environment ................WARNING AND SAFETY INSTRUCTIONS ............Operating the tumble dryer ................16 Control panel ....................... 16 Sensor controls and touch display with sensor controls ........17 Main menu......................17 Examples of how to operate the appliance............18 Operating a launderette machine ................
  • Page 3 Contents Timer........................33 Program overview ..................... 34 Label........................34 Program packages ....................35 Standard......................35 Sport........................39 Soft furnishings ....................40 Hygiene ....................... 41 WetCare....................... 42 Flatwork....................... 42 Special programs ....................43 Changing the program sequence ..............44 Changing a program once it has started............. 44 Cancelling a program ..................
  • Page 4 Contents Cleaning the bottom right grille/heat exchanger ..........62 Removing the grille..................62 Cleaning the cooling fins ................63 Replacing the grille..................63 Cleaning the tumble dryer ................... 64 Frequently Asked Questions ................65 Program cancellation and error message in the display ........65 Messages in the display..................
  • Page 5 Contents Demo program ....................86 Closing the settings menu................... 86 Controls / Display ....................86 Language......................86 Language entry ....................87 Set languages....................87 Display brightness..................87 Clock display....................88 Date ........................ 88 Volume......................88 Res. moisture display ..................88 Visibility parameters ..................
  • Page 6 Contents External applications ................... 98 Peak-load signal ..................... 98 Peak-load prevention ..................98 Select COM module ..................98 Availability of Miele digital products ............... 98 Wi-Fi / LAN ..................... 99 Network sign-on..................... 100 Remote ......................100 Remote Update ....................101 SmartGrid .......................

  • Page 7: Caring For The Environment

    Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.

  • Page 8: Warning And Safety Instructions

    Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Do not make any alterations to the tumble dryer, unless authorized to do so by Miele. Repairs should only be carried out by a Miele approved service technician, otherwise there could be a considerable danger to the user.
  • Page 9 WARNING AND SAFETY INSTRUCTIONS  Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine.
  • Page 10 WARNING AND SAFETY INSTRUCTIONS  To prevent the risk of fire, the following items must not be tumble dried: - Items which have not been washed. - Items which have not been thoroughly cleaned and are still soiled with grease, oil or other deposits (such as work clothes, kitchen linens or cosmetics cloths with lubricants, cooking oils, grease, lotions, etc, as there is a danger that they might ignite when heated (chemical reaction), even after they have been removed...
  • Page 11 It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.
  • Page 12 Miele Tumble Dryer and the Miele Washing Machine.  If you order a plinth for this tumble dryer (available from Miele as an optional accessory), make sure it is the correct one. ...
  • Page 13 It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorized technician or by Miele Service.  Information on the heat pump and refrigerant - This tumble dryer uses refrigerant gas which is not flammable and not explosive.
  • Page 14 WARNING AND SAFETY INSTRUCTIONS Using a fragrance capsule (optional accessory)  Only ever use original Miele Fragrance Capsules.  The fragrance capsule must be stored in its packaging so please make sure you retain this.  Make sure that you always keep the fragrance capsule or the lint filter with the capsule inserted in it in a horizontal position when carrying, and do not tip or place it down on any surface.
  • Page 15 WARNING AND SAFETY INSTRUCTIONS FCC Declaration of Conformity  This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference.

  • Page 16: Operating The Tumble Dryer

    Operating the tumble dryer Control panel a Language sensor control e Optical interface For selecting the current user For service technicians. language. f Button  The operating language is displayed For switching the tumble dryer on again at the end of the program. and off.

  • Page 17: Sensor Controls And Touch Display With Sensor Controls

    Operating the tumble dryer  Programs Sensor controls and touch display with sensor controls For selecting drying programs. The , , and Start/Stop sensor  Favourites controls and the sensor controls in the For selecting one of 12 favourite drying display react to finger tip contact. Every programs which can be set up and touch of a sensor control is confirmed saved by the supervisor (see “Favourite...

  • Page 18: Examples Of How To Operate The Appliance

    Operating the tumble dryer Extras menu (multiple choice) Examples of how to operate the appliance  Extras 11:02 Option lists  Gentle tumble Program menu (single option list)  Programs 11:02  Anti-crease Cottons Express Shirts Touch one or several Extras to select it/ Minimum iron Delicates Denim...
  • Page 19 Operating the tumble dryer Useful tip: For some settings, Pull-down menu depending on the value range and The pull-down menu can be used to increments, the value can also be set display information, e.g. about a drying using a numerical keypad. Briefly program.

  • Page 20: Operating A Launderette Machine

    Operating the tumble dryer Laundromat Logo Operating a launderette machine  11:02 The entry menu will vary depending on  the programming status (see    “Controls” under “Supervisor level”). Shortcuts simplify the operation of the Cottons Cottons Cottons machine.
  • Page 21 Operating the tumble dryer Laundromat Logo int. time / Laundromat Logo ext. time  11:02      Help 4 time programs with different temperature levels are available for selection. -  Temperature level cold -  Temperature level low -  Temperature level medium -  Temperature level high Laundromat Logo ext.

  • Page 22: Initial Commissioning

    Some of the settings can only be configured during the initial commissioning process. After that, they must be changed by Miele Service. These settings are also described under “Supervisor level”.

  • Page 23: Reference To External Appliances

    Initial commissioning Reference to external Setting the date appliances Date A reference to external hardware 2023 appears. June 2022  Confirm with the July 2021  sensor button. Connect the XCI box or XCI-AD August 2020 accessory unit before using the 2019 September appliance for the first time.

  • Page 24: Selecting Program Packages

    Initial commissioning Confirming the time request Selecting program packages The following question appears in the You can select various programs from display: the program packages. Any programs already active are Omit clock display? highlighted in orange.  Touch the  sensor button. Program packages 11:02 If you select...

  • Page 25: Completing The Commissioning Process

    Timed drying Basket - Low Microfibre Miele Service. cool air temperature If you do not wish to set up a payment system, you can skip this stage.  Select the Timed drying cool air...

  • Page 26: Notes On Correct Laundry Care

    1. Notes on correct laundry care Washing Understanding the care label symbols - Heavily soiled laundry must be washed particularly thoroughly. Use Drying sufficient detergent and select a high temperature. If in doubt, wash the  Normal/higher temperature* items several times. ...

  • Page 27: Loading The Tumble Dryer

    2. Loading the tumble dryer Checking the socket for the Loading the laundry fragrance capsule Textiles may be damaged. If you are not using a fragrance capsule, Before loading, read “1. Notes on check that the socket is closed. correct laundry care”. The “Fragrance capsule”...

  • Page 28: Selecting A Program

    3. Selecting a program Switching on the tumble dryer Alternatively, you can select a program via:   Favourites*.  Press the  button. * The pre-set programs under The drum lighting will come on. cannot be changed.  Favourites The drum lighting will automatically go ...

  • Page 29: Selecting Program Settings

    * The time frame for the selected Different drying levels are available program duration can be limited by depending on the program. Miele Service.  Overview 11:02 Timed drying warm air = 00:20–...

  • Page 30: Selecting Extra Options

    4. Selecting program settings Gentle tumble Selecting extra options Sensitive items are dried with less The drying programs can be mechanical movement (fewer drum augmented with various extra options. rotations).  Overview 11:02 Anti-crease  Weight Drying level After the program has finished, the drum will continue to rotate in a certain Normal Cottons...

  • Page 31: Starting A Program

    5. Starting a program Payment system Program duration/estimated time remaining (If applicable) The program duration depends on the Useful tip: If your machine is quantity of laundry, the type of fabric, connected to a payment system, the and the residual moisture in the laundry amount of payment required will appear or also the water hardness.

  • Page 32: End Of Program - Removing The Laundry

    6. End of program – removing the laundry End of program Removing the laundry The laundry will be cooled down shortly before the end of the program. The laundry can now be unloaded. Finish lights up If Anti-crease * has been selected, the drum rotates in intervals.

  • Page 33: Timer

    Timer Deleting the timer The Delay start must be activated in the Supervisor level so that the timer can The selected delay start period can be be selected. cancelled before the program starts. Before the program starts, the Timer  Touch the , , or  sensor can be used to select a program start control.

  • Page 34: Program Overview

    Program overview All weights marked with * are based on the weight of dry laundry. Label Cottons Eco Maximum 17.6 lb (8 kg)* Items Cotton items such as those described under Cottons, Normal with normal residual moisture. Note - Items are dried to a Normal level only in this program. - The Cottons  program is the most energy-efficient for drying cotton items with normal residual moisture levels.

  • Page 35: Program Packages

    Program overview Program packages You can select various programs from the program packages. The programs will appear in the program list. Standard Cottons Maximum 17.6 lb (8 kg)* Extra dry, Normal plus, Normal Items - Single and multi-layered cotton items. - Towelling, bathrobes, T-shirts, underwear, jersey bed linen, baby clothes.
  • Page 36 Program overview Express Maximum 8.8 lb (4 kg)* Extra dry, Normal plus, Normal, Hand iron plus, Hand iron, Machine iron Items Garments suitable for the Cottons program Note Shorter program duration Delicates Maximum 8.8 lb (4 kg)* Normal plus, Normal, Hand iron plus Items - Delicate synthetic, cotton, or mixed fibre fabrics. - Lightweight pullovers, dresses, pants, overalls, table cloths, dress shirts, and blouses.
  • Page 37 Program overview Silks Maximum 2.2 lb (1 kg)* Items Silk garments which are suitable for tumble drying, e.g. blouses and shirts Note - Program for reduced creasing. - Items are not dried completely in this program. - Remove the garments as soon as the program has finished. Towelling Maximum 17.6 lb (8 kg)* Items...
  • Page 38 Note - These programs may only be used with the Miele Dryer Basket (optional accessory). - Select Basket – Low temperature for temperature-sensitive items.

  • Page 39: Sport

    Program overview Sport Sportswear Maximum 6.6 lb (3 kg)* Items Sportswear that is suitable for drying in a tumble dryer. Note Items are dried to a Normal level only in this program. Outdoor Maximum 5.5 lb (2.5 kg)* Normal, Hand iron plus Items Outdoor clothing which is suitable for drying in a tumble dryer.

  • Page 40: Soft Furnishings

    Program overview Soft furnishings Down bedding Maximum 4.4 lb (2 kg)* Items Bedding suitable for tumble drying (duvets or pillows filled with down or feathers). Note Items are dried to a Normal level only in this program. Feathers have a tendency of developing a strong odour when they are warm.

  • Page 41: Hygiene

    Program overview Hygiene In the hygiene programs, items will be dried with a temperature that is constant over an extended period (longer temperature holding time). This kills off micro- organisms such as germs or dust mites and reduces allergens in the laundry. If a hygiene program is cancelled early, micro-organisms will not be killed.

  • Page 42: Wetcare

    Program overview WetCare WetCare Sensitive Maximum 5.5 lb (2.5 kg)* Items Non-washable outerwear Note The garment is briefly dried and fluffed up WetCare Silks Maximum 5.5 lb (2.5 kg)* Normal, Hand iron plus, Hand iron Items Non-washable silk garments which crease easily WetCare Intensive Maximum 5.5 lb (2.5 kg)* Normal, Hand iron, Hand iron plus, Machine iron Items Washable outerwear...

  • Page 43: Special Programs

    Program overview Special programs You can put together 5 special programs and assign your own program names. Enter these into the tables. Load: maximum 17.6 lb (8 kg) (weight of dry items) Example [Special program 1] Dry+ Res. moisture program – Final residual moisture  : –...

  • Page 44: Changing The Program Sequence

    * Either during the commissioning  Risk of burns by touching hot process or subsequently, Miele Service laundry in the drum. can reset the payment system so that You could burn yourself. programming changes can be made.

  • Page 45: Fragrance Capsule

    Fragrance capsule Inserting a fragrance capsule The fragrance capsule is inserted in the upper lint filter. The socket is next Fragrance capsule (optional to the recessed grip. accessories) can be used to give your laundry a pleasant scent. If you are not using a fragrance capsule, the cover to the unused ...
  • Page 46 Fragrance capsule  Insert the fragrance capsule as far it  Turn the outer ring  clockwise a will go into the socket. little. The fragrance capsule may slip out. Turn the outer ring in such a way that the markers  and  line up. The markers ...

  • Page 47: Opening The Fragrance Capsule

    Fragrance capsule Opening the fragrance capsule Closing the fragrance capsule Before drying, you can select the After drying, the fragrance capsule intensity of the fragrance. should be closed to prevent the fragrance from escaping needlessly.  Turn the outer ring clockwise: the ...

  • Page 48: Removing/Replacing The Fragrance Capsule

    - Always store in a cool, dry place packaging. away from direct sunlight. Fragrance capsules are available to - When purchasing new fragrance order from Miele. capsules, only remove the protective seal just before use.

  • Page 49: Cleaning And Care

    Cleaning and care 1. Cleaning the lint filters Observing the cleaning intervals The lint filters are located in the drum loading area. This tumble dryer is equipped with a multi-stage filter system, which consists of lint filters (1.) and a filter (in the plinth) (2.).

  • Page 50: Cleaning The Plinth Filter

    There is insufficient flow of air and heat in the heat exchanger due to clogging. This requires a visit from the Miele Service department. This can be avoided by following the advice in these operating instructions.

  • Page 51: Cleaning The Bottom Right Grille/Heat Exchanger For Heat Dissipation

    Cleaning and care 3. Cleaning the bottom right grille/ heat exchanger for heat dissipation Clean only when Open bottom right appears grille, clean the heat exchanger in the display. The bottom right grille can be removed. This covers the heat exchanger for heat dissipation.

  • Page 52: Cleaning The Lint Filters

    Cleaning and care Cleaning the lint filters This tumble dryer has 2 lint filters in the loading area. The upper and lower lint filters trap lint produced during the drying process. Removing the fragrance capsule The intensity of the fragrance will be diminished if the lint filters and the plinth filter are not cleaned.

  • Page 53: Cleaning The Lint Filters And Air Flow Openings Thoroughly

    Cleaning and care Cleaning the lint filters and air flow openings thoroughly If the drying duration has become longer or the surface of the filters is visibly compacted with lint, you should carry out the following cleaning procedure. Cleaning the lint filters while dry ...
  • Page 54 Cleaning and care Cleaning the lint filters with water  Rinse the lint filters through with warm running water.  Wipe the smooth plastic surfaces of both lint filters with a damp cloth to clean them. Wet lint filters could cause operational faults while drying.

  • Page 55: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter The lint filter in the plinth collects finer lint, hair, and detergent residues that have got through the surfaces of the lint filters. Removing the lint filter  Pull the lint filter out at an angle. ...

  • Page 56: Cleaning The Lint Filter With Water

    There will be an insufficient flow of air and heat in the heat exchanger. This will require a visit from the Miele Service department. Before and after cleaning, check the plinth filter in accordance with the description in “Replacing the plinth...
  • Page 57 Cleaning and care Deformation White residues or residues of other colours Deformations indicate that the filter has become blocked and worn by Residues arise from laundry fibres and continuous use. traces of detergent components which Cracks, tears, indentations can clog the filter. They can be found on the front and side edges of the filter.

  • Page 58: Cleaning The Filter Insert (In The Plinth)

    Cleaning and care Removing the filter insert Cleaning the filter insert (in the plinth) If the filter insert is clogged up and soiled, it must be removed and cleaned The surface of the filter in the filter under running water. insert is visible after removing the lint filter in the plinth.

  • Page 59: Checking The Cooling Fins On The Heat Exchanger

    Cleaning and care Checking the cooling fins on the heat  Risk of damage if cooling fins are exchanger cleaned incorrectly. The cooling fins can suffer damage  Danger of injury caused by or distortion. This could hinder the touching the cooling fins. operational performance of the You could cut yourself.

  • Page 60: Refitting The Filter Insert (In The Plinth)

    Cleaning and care Refitting the filter insert (in the plinth)  Press the frame of the filter insert in at the positions marked PUSH until it  Use the handle on the right to slide audibly engages. the filter insert at an angle behind the edge.

  • Page 61: Cleaning And Closing The Lint Filter Flap

    Cleaning and care Cleaning and closing the lint filter flap  Use the handle on the right to slide the lint filter at an angle behind the edge.  Use a damp cloth to remove any lint. Make sure that you do not damage the rubber seal when doing this.

  • Page 62: Cleaning The Bottom Right Grille/Heat Exchanger

    Cleaning and care Removing the grille Cleaning the bottom right grille/heat exchanger The heat exchanger's cooling fins behind the grille can become blocked with dust and dirt drawn in from the surrounding area.  Open the lint filter flap. Open the bottom right grille, e.g. using a spoon handle.

  • Page 63: Cleaning The Cooling Fins

    Cleaning and care Cleaning the cooling fins Replacing the grille  Check whether the cooling fins are clogged.  Danger of injury caused by touching the cooling fins. You could cut yourself. Do not touch the cooling fins with your hands. If there is visible soiling: ...

  • Page 64: Cleaning The Tumble Dryer

    Cleaning and care Cleaning the tumble dryer Disconnect the tumble dryer from the electrical supply.  Damage caused by the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all- ...

  • Page 65: Frequently Asked Questions

    Frequently Asked Questions With the help of the following guide, minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This will save you time and money because you won't need a service call.
  • Page 66 Frequently Asked Questions Message Possible cause and solution You have attempted to dry only a few items of  Rinse the lint filter varying size. and plinth filter. A smaller item has been sucked into the loading area Check the airways. in the door.
  • Page 67 Service.  Note the prompt in the display.  Touch the  sensor button.  Start a drying program. If the program is cancelled again with the same fault message, then there is a fault. Contact Miele Service.

  • Page 68: Messages In The Display

    Frequently Asked Questions Messages in the display Message Possible cause and solution The heat exchanger’s cooling fins behind the grille  Open bottom right can become blocked with dust and dirt drawn in from grille, clean the heat the surrounding area and the airways can become exchanger blocked with lint.

  • Page 69: Unsatisfactory Drying Results

    Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not The load consisted of different types of fabric. sufficiently dry.  Finish drying using the Timed drying warm air program. Large items of laundry The laundry could not be untangled in the program have rolled up you selected.

  • Page 70: The Drying Cycle Duration Is Very Long

    Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process The room in which the tumble dryer is located is too goes on too long or warm. even switches off*.  Ventilate the room thoroughly. Detergent residues, hair, and fine lint can clog the filters.

  • Page 71: General Problems With The Tumble Dryer

    Frequently Asked Questions General problems with the tumble dryer Problem Possible cause and solution You can hear buzzing or This is not a fault. The compressor (heat pump) is humming operating operating. noises. These noises are quite normal and can be heard when the compressor is operating.

  • Page 72: Reactivating The Plinth Filter

    Frequently Asked Questions Reactivating the plinth filter You can reactivate one or more dirty plinth filters in the washing machine. You will then be able to use the plinth filter again for a reasonable period of time.  Wash the plinth filter(s) separately, not with any laundry items.

  • Page 73: Technical Service

    Optional accessories In the event of a fault which you cannot Optional accessories for this tumble remedy yourself, please contact your dryer are available from your Miele Miele dealer or Miele Service. dealer or Miele Service. Contact information for Miele Service can be found at the end of this document.
  • Page 74 Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.

  • Page 75: Warning And Safety Instructions

     Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be carried out by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty.
  • Page 76 At temperatures around freezing point the tumble dryer may not be able to operate properly.  This dryer is not intended for wall-insert.  Should you have any questions regarding installation, please get in touch at: 1-888-325-3957 serviceprofessional@miele.ca KEEP THESE OPERATING INSTRUCTIONS IN A SAFE PLACE...

  • Page 77: Installation And Connection

    *INSTALLATION* Installation and connection Front view a Drain hose for condensed water e Power cord b Control panel f Door c Lint filter flap for the filter in the plinth g Bottom right grille = Air cooling opening – (open only when a prompt appears in the display) –...

  • Page 78: Rear View

    *INSTALLATION* Installation and connection Rear view a Interface for communicating with d Module slot (for external external appliances communication module) b Power cord e Drain hose for condensed water c Recesses under the protruding lid for transporting the appliance...

  • Page 79: Installation Locations

    Side view Washer-dryer stack Steel plinth A stacking kit* is required. This must be installed by a Miele authorized service technician. * Miele accessory available to order Steel plinth* (open or closed bases, e.g. APCL 002, APCL 003, APCL 005, APCL 007, APCL 011 or APCL 012)

  • Page 80: Transporting The Tumble Dryer To Its Installation Site

    *INSTALLATION* Installation and connection Transporting the tumble dryer to its Transporting the tumble dryer installation site to its installation site  Danger of injury due to unsecure  Damage caused by incorrect lid. transportation of the tumble dryer. The fixings at the back of the lid may If the tumble dryer tips over, there is become brittle due to external a danger of injury to people and...

  • Page 81: Installation

    *INSTALLATION* Installation and connection Installation Ensure that no closeable door, sliding door, or an oppositely hinged door is installed that would hinder the door of the dryer being opened in any way. Downtime after installation  Damage caused by switching the appliance on too soon.

  • Page 82: Room Ventilation

    (If applicable) and switch the other appliances off. This tumble dryer can be fitted with a Otherwise running times and energy payment system (optional Miele consumption could be increased. accessory). Therefore Miele Service needs to program a setting in the dryer electronic and connect the payment system.

  • Page 83: Drain Hose For Condensed Water

    *INSTALLATION* Installation and connection Inserting the drain hose into a Drain hose for condensed standpipe water  Insert the end of the drain hose into The condensed water is pumped away the standpipe. through the drain hose which is located at the back of the dryer. ...

  • Page 84: Electrical Connection

    *INSTALLATION* Installation and connection The plug connector or isolator switch Electrical connection should be easily accessible at all times. This description applies to tumble  dryers both with and without an Risk of electric shock. electrical plug. If the tumble dryer is disconnected from the electrical supply, protective The following applies to tumble dryers measures must be taken to ensure...

  • Page 85: Technical Data

    Technical data Height 850 mm (33 7/16" ) Width 596 mm (23 7/16") Width (only for appliances with a 605 mm (23 13/16") stainless steel lid) Depth 777 mm (30 9/16") Depth with door open 1,191 mm (46 7/8") Weight 75 (165 lb) Drum volume 130 l (34.3 gal) Load quantity...

  • Page 86: Supervisor Level

    Controls / Display dryer from unauthorized access. Language Carefully enter a new code. Please inform Miele Service if you The display can be set to appear in have forgotten your new code. Miele one of several different languages. To Service will have to reset the code.

  • Page 87: Language Entry

    Supervisor level Language entry Set languages The languages for the setting Language The display can be set to one of entry International can be changed. several different user languages. This setting allows you to determine how 6 languages can be selected. All languages can be selected.

  • Page 88: Clock Display

    Supervisor level Clock display Res. moisture display After selecting the clock format, you In addition to displaying the drying can set the time of day. level, the residual moisture can also be indicated as a percentage. Clock format - Factory default: without percentages - Factory default: 24-hour display - With percentages - 12-hour display...

  • Page 89: Display" Off Status

    Supervisor level “Display” off status “Machine” off status The display switches off to save In order to save energy, the tumble energy; only the Start/Stop sensor dryer will switch off automatically after control flashes slowly. You can change the end of the program or if no further this setting.

  • Page 90: Memory

    Supervisor level Memory Logo The tumble dryer saves the settings You can choose whether the “Miele that were selected last for a drying Professional” logo or your own logo program (drying level and/or Extra appears in the display. option, or the duration for some For the  setting, the...

  • Page 91: Program Selection

    Supervisor level - Standard Program selection Factory default: all (selected) Controls programs are available. You can select whether the tumble - Laundromat basic dryer is operated as a “launderette” 12 programs are available. machine. Shortcuts simplify the operation of the machine. Operating Under Favourite programs, you can staff are unable to change pre-set set which or how many programs can...

  • Page 92: Program Packages

    Supervisor level - Laundromat Logo int. time 4 time programs* with different temperature levels are time- controlled via the tumble dryer’s electronic. The maximum laundry weight is 17.6 lb (8 kg). The set value indicates the maximum running time and can be modified by the user.

  • Page 93: Favourite Programs

    Supervisor level Favourite programs Reducing the number of Favourite programs After switching on, you can also select You can reduce the number of Favourite a program via:  Favourites. programs by “deactivating” each one 12 programs can be stored as individually. favourites based on your own priorities and requirements.

  • Page 94: Special Programs

    Supervisor level Res. moisture program Special programs - Final residual moisture: You can put together 5 special – 6% (dry) – 40% (damp) residual moisture or time-controlled programs and assign your own - Extra drying time: program names. 0–60 minutes First, enter the program name. - Temperature (Process air): cold –...

  • Page 95: Sort Programs

    Supervisor level Timed drying Sort programs - Running time: Programs can be moved within the 1–120 minutes program list and in the Favourites list. - Temperature (Process air): - Factory default: Off cold – 158°F (70°C) - On - Drum rotation main direction: ...

  • Page 96: Process Technology

    Supervisor level Additional cooling Process technology Before the end of the program, the Anti-crease temperature of the dried laundry is At the end of the program, the drum monitored and the cooling phase at will continue to rotate at intervals if the the end of the program is extended if laundry is not removed immediately.

  • Page 97: Service

    Supervisor level Service interval Service The tumble dryer shows a custom Clean out the airways message at a selected interval to The tumble dryer's electronic prompt you to undertake specific calculates the degree at which lint or maintenance tasks. detergent residue in the lint filters and 3 different messages can be created: air ducts are impairing performance.

  • Page 98: External Applications

    The tumble dryer may only be Availability of Miele digital products operated with a peak-load system if The ability to use Miele digital products this system is connected to the tumble depends on the availability of the dryer via the Miele XCI Box.

  • Page 99: Wi-Fi / Lan

    The network remains set up; the WiFi process. function is switched off. via Soft AP - Activate (visible when the network is  Activate the function with the Miele deactivated) app on your smart device within The WiFi function is reactivated. 10 minutes.

  • Page 100: Network Sign-On

    Supervisor level Network sign-on Remote The date and time can be Programs are selected on an external synchronized over the network. terminal. - Off Factory default: Off The date and time are not synchronized over the network. - As master The machines are in a network but are not connected to the Internet.

  • Page 101: Remote Update

    RemoteUpdate immediately or wait until you can continue to use your tumble later. If you select “Start later”, the dryer in the usual way. However, Miele prompt to run the RemoteUpdate will recommends installing RemoteUpdates. be displayed again the next time you switch on your tumble dryer.

  • Page 102: Appliance Parameters

    These items of software/software components are protected by - No payment system copyright. The copyright powers of The next settings are skipped and Miele and third parties must be initial commissioning can be respected. completed. In addition, the appliance contains...

  • Page 103: External Program Lock

    Supervisor level External program lock Payment system lock The control unit has an option to block To avoid tampering, a program lock programs. Programs are blocked by can be set up in program operation. If an external system via the COM the lock is applied, the program is interface.

  • Page 104: Debounce Time

    Supervisor level Debounce time Duration Cool air In coin-box mode, the debounce time The running time can be adjusted. for the minimum payment signal that A time of between 10 minutes and must be applied can be adjusted. 2 hours can be set in five-minute - Factory default: Short intervals.
  • Page 107 Technical Service. Canada Importer Miele Limited Professional Division 161 Four Valley Drive Vaughan, ON L4K 4V8 1-888-325-3957 Phone: 1-800-803-3366 Fax: www.mieleprofessional.ca professional@miele.ca Miele Professional Technical Service Phone: 1-888-325-3957 Fax: 1-800-803-3366 serviceprofessional@miele.ca Manufacturer: Miele & Cie. KG Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
  • Page 108 PDR 908 HP en-CA M.-Nr. 11 770 760 / 00...

Table of Contents