The Delay start must be activated in
the Supervisor level so that the timer
can be selected.
Before the programme starts, the
Timer can be used to select a pro-
gramme start time or programme end
time.
Setting the timer
Touch the
timer
Select the option
.
Start at
Set the hours and the minutes with
the
sensor.
OK
Changing the timer
The selected delay start time period can
be changed before the programme start.
Touch the , or sensor.
If required, change the specified time
and confirm with the
sensor.
,
or
Finish at
Start in
sensor.
OK
Deleting the timer
The selected delay start period can be
cancelled before the programme starts.
Touch the , or sensor.
The selected delay start period will ap-
pear in the display.
Touch the
Delete
Confirm with the
The selected delay start period is de-
leted.
Starting the timer
Touch the Start/Stop sensor.
The door will lock and the time until the
programme starts will appear in the dis-
play.
After the programme has started, the
selected delay start period can only be
changed by interrupting the pro-
gramme.
The programme can be started immedi-
ately at any time.
Touch the
Start immediately
Timer
sensor.
sensor.
OK
sensor.
37