Changing The Programme Sequence; Changing A Programme Once It Has Started; Cancelling A Programme; Reselecting A Cancelled Programme - Miele PDR 908 HP Operating And Installation Instructions

Changing the programme sequence

Payment systems
Opening the door or cancelling the
programme after it has started may
cause a loss of credit (depending on
how the tumble dryer was set up*).
* Either during the commissioning pro-
cess or subsequently, a Miele service
technician can reset the payment sys-
tem so that programming changes can
be made.
Changing a programme once it
has started
You cannot change to another pro-
gramme once a programme has started
(this prevents unintentional alterations).
You will need to cancel the current pro-
gramme before you can select a new
one.

Risk of fire due to incorrect use
and operation.
The laundry can burn and destroy the
tumble dryer and the surroundings.
See the section on "Warning and
safety" for further information.

Cancelling a programme

 Touch the Start/Stop sensor control.
A message will appear in the display
asking if you wish to cancel the pro-
gramme.
 Touch the sensor control.
Yes
48

Reselecting a cancelled programme

 Open and close the door.
 Select and start a new programme.

Adding laundry

 Open the door.

Risk of burns by touching hot
laundry in the drum.
You could burn yourself.
Let the laundry cool down and re-
move it carefully.
 Add items.
 Close the door.
 Start the programme.
Interruption to the power sup-
ply
If the power supply is interrupted be-
cause the tumble dryer has been
switched off with the button :
 Switch the tumble dryer on.
 Touch the Start/Stop sensor control.
If the power supply is interrupted by a
power cut:
 When power is restored, confirm with
.
OK
 Touch the Start/Stop sensor control.
Time remaining
Altering the programme sequence can
cause adjustments in the h min time re-
maining display.