Set the blend pattern width.
-
Overlap Grid Number:
Set the blend overlap grid number.
-
Gamma:
Set the gamma value of the blend area to adjust the curvature of the blending effect.
Width
Blend area
Gamma
Image 9–6
Reset
Reset the geometry settings to their factory default values.
Save memory
Select a record from 1 to 5 to save the current geometric correction settings.
Apply memory
Select a record from 1 to 5 to apply the geometric correction settings.
Clear memory
Clear the saved geometric correction records.
9.7 Low latency
About low latency
Use this function to enable/disable the system to reduce response times (input latency) during gaming.
•
Normal:
Without reducing the latency.
•
2D ultra:
Reduce the latency of image that can display image simultaneously.
9.8 Auto image setup
About auto image setup
Automatically adjust the image to achieve better performance.
User controls – Installation menu
R5914653 /10
G62
61