Advanced Settings; Remote Access - Enable Source Preview - Barco F80 User Manual

10.15 Advanced Settings

About the Advanced Settings menu
The Advanced Settings and Remote access menus are hidden by default for the regular user. you can only
make these menus visible after entering a Service code with the remote control.
If you have a service code, navigate to the Maintenance menu. Enter the code with the numeric keys. If
entered correctly, the Advanced Settings and Remote access options will become visible. Next to that, a red
"shield" icon on top of the Maintenance menu will become visible.
It doesn't matter what else you do or type with the remote. As long as you type in the service code in
the correct order, the Advanced Settings option will become visible.
Image 10–37 Example of the Maintenance menu, with the Advanced menu and Remote access menu unlocked
The Advanced Settings and Remote access menu items will remain visible until you leave the
Maintenance menu.
10.15.1 Remote access – Enable source preview
Source preview
Up until Pulse software 2.0. x, you were able to see a preview of the connected source when you remotely
accessed the projector. This was a feature you could disable using PToolset.
However, from Pulse 2.1. x onward, this feature is disabled by default and can now be enabled in both
PToolset and the Pulse GUI.
Upgrading your projector from a software version 2.0.x or older to 2.1.x or newer will disable Source
preview by default. Once the software has been successfully upgraded, you can always opt to
enable this feature again.
How to enable source preview
1. In the main menu, select Settings → Maintenance and enter the service code to visualize the hidden
Remote access menu.
Image 10–38 Maintenance menu, Remote access
GUI – System Settings
R5906852 /06 F80 129