Aborting Test Patterns; H Lamp Test; Starting A Lamp Test; Aborting A Lamp Test - Paradyne 3162 User Manual
Hewlett-packard acculink dsu / csu user's guide 3162
Hide thumbs
Also See for 3162:
- Quick reference (29 pages) ,
- Quick reference manual (29 pages) ,
- Quick installation (2 pages)
Table of Contents
Advertisement
Monitoring and Testing
Aborting Test Patterns
"
Lamp Test
Starting a Lamp Test
"
Aborting a Lamp Test
"
5-28
Use the Abort Tests command to stop all test patterns or any selected test pattern
active on the DSU/CSU.
Procedure
To abort test patterns:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Abort Tests.
Use the Lamp Test command to start or stop a test of the DSU/CSU front panel
LEDs.
Procedure
To start a Lamp test:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Device Tests.
3. For the Lamp Test command, select Start.
Procedure
To abort the Lamp test:
1. From the Main Menu screen, select Test.
2. From the Test screen, select Device Tests.
3. For the Lamp Test command, select Stop.
August 2000
3162-A2-GB20-40
Advertisement
Table of Contents
