Configuring The Dsl Cards; Monitoring The Dsl Cards - Paradyne Hotwire 8303 User Manual

Configuring the DSL Cards

The Hotwire DSL software provides DSL configuration options to:
T
T
T
T
T
T
T
For more information about configuring the system, see
Configuration.

Monitoring the DSL Cards

The Hotwire DSL software provides menu options to monitor the activity of the
Hotwire DSL cards. The monitoring screens allow you to:
T
T
T
T
Use the monitoring screens to help you gather pertinent information and isolate
potential problem areas. You can monitor the system with either Administrator or
Operator permission. For more information about monitoring the system, see
Chapter 4, Monitoring the Hotwire DSL
8000-A2-GB26-70
Configure the DSL cards.
Configure the DSL port card at the physical port and logical interface levels.
Configure a Service Node (SN).
Configure bridging information.
Configure filters and associated rules.
Upload or download a copy of a card's configuration data to or from a Trivial
File Transfer Protocol (TFTP) server.
Download a new version of the Access Node software.
NOTE:
You must have Administrator permission to configure the system.
List the status of active ports and interfaces in a card, as well as display
statistics about the physical layers and interfaces.
Display network protocol statistics, such as information about an application
program assigned to a specific socket number, UDP statistics, TCP data and
connection statistics, IP statistics, ICMP packet statistics, and SNMP statistics
including SNMP authentication statistics.
Display information about the Client, ARP, and Virtual Network Identifiers
(VNIDs).
Display endpoint information about DSL ports such as Service Node type,
system name, system contact, and system location. Model and serial number,
along with firmware and hardware revisions, are also shown.
April 2002
1. Hotwire DSL System Description
Chapter 3, DSL Card
System.
1-9