Setting The Ip Address - Paradyne 3162 User Manual

Configuration

Setting the IP Address

"
4-6
The IP address is the address used by the SNMP or Telnet system to access the
DSU/CSU (see Appendix F,
using PPP, the IP address can be negotiated if the network device (e.g., router or
SNMP manager) supports such negotiation. The IP address is composed of four
fields with three digits per field (xxx.xxx.xxx.xxx).
The example below assumes that an IP address of 010.155.111.222 is being set
for the COM port. You can use the same principles to assign any value (between
000 and 255 for each digit field).
Procedure
To assign an IP address to the COM port:
1. From the Main Menu screen, select Configuration.
2. From the Load Configuration From screen, select Current.
3. From the Configuration Edit/Display screen, select Management and
Communication.
4. From the Management and Communication screen, select Communication
Protocol.
5. In the Communication Port's IP Address field, enter the IP address for the
COM port. Enter the subnet mask under this.
6. When you are through making configuration option changes, select Save to
store these changes in nonvolatile memory. If you want to return to the User
Interface screen, press your Esc key and then save your changes from that
screen.
August 2000
IP Network Addressing Scenario). For DSU/CSUs
3162-A2-GB20-40