HP 3600 v2 Series Configuration Manual page 228

# Set the 802.1X authentication method to CHAP. (This configuration is optional. By default, the
authentication method is CHAP for 802.1X.)
[Device] dot1x authentication-method chap
# Set port security's limit on the number of MAC addresses to 64 on the port.
[Device-Ethernet1/0/1] port-security max-mac-count 64
# Set the port security mode to macAddressElseUserLoginSecure.
[Device-Ethernet1/0/1] port-security port-mode mac-else-userlogin-secure
# Set the NTK mode of the port to ntkonly.
[Device-Ethernet1/0/1] port-security ntk-mode ntkonly
Verifying the configuration
# Display the port security configuration.
<Device> display port-security interface ethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Ethernet1/0/1 is link-up
Port mode is macAddressElseUserLoginSecure
NeedToKnow mode is NeedToKnowOnly
Intrusion Protection mode is NoAction
Max MAC address number is 64
Stored MAC address number is 0
Authorization is permitted
Security MAC address learning mode is sticky
Security MAC address aging type is absolute
# Display MAC authentication information.
<Device> display mac-authentication interface ethernet 1/0/1
MAC address authentication is enabled.
User name format is MAC address in lowercase,like xx-xx-xx-xx-xx-xx
Fixed username: mac
Fixed password: not configured
Silent MAC User info:
Ethernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 7
Max number of on-line users is 2048
Offline detect period is 60s
Quiet period is 5s
Server response timeout value is 100s
The max allowed user number is 2048 per slot
Current user number amounts to 3
Current domain is mac
MAC Addr From Port
215
Port Index