HP 3600 v2 Series Configuration Manual page 208

# Specify usernames sent to the RADIUS server to carry no domain names.
[Switch-radius-rs1] user-name-format without-domain
[Switch-radius-rs1] quit
9. Configure an ISP domain:
# Create an ISP domain named triple.
[Switch] domain triple
# Configure the default AAA methods for all types of users in the domain.
[Switch-isp-triple] authentication default radius-scheme rs1
[Switch-isp-triple] authorization default radius-scheme rs1
[Switch-isp-triple] accounting default radius-scheme rs1
[Switch-isp-triple] quit
# Configure domain triple as the default domain. If a username input by a user includes no ISP
domain name, the authentication scheme of the default domain is used.
[Switch] domain default enable triple
Verifying the configuration
User userdot uses the 802.1X client to initiate authentication. After inputting the correct username and
password, the user can pass 802.1X authentication. Web user userpt uses a web browser to access an
external network.
http://4.4.4.4/portal/logon.htm. After inputting the correct username and password, the web user can
pass portal authentication. The printer can pass MAC authentication after being connected to the
network.
Use the display connection command to view connection information about online users.
[Switch] display connection
Slot: 1
Index=30
IP=192.168.1.2
IPv6=N/A
MAC=0015-e9a6-7cfe
Index=31
IP=3.3.3.2
IPv6=N/A
MAC=0002-0002-0001
Index=32
IP=N/A
IPv6=N/A
MAC=0015-88f8-0dd7
Total 3 connection(s) matched on slot 1.
Total 3 connection(s) matched.
Use the display mac-vlan all command to view the MAC-VLAN entries of online users. VLAN 3 is the
authorized VLAN.
[Switch] display mac-vlan all
The following MAC VLAN addresses exist:
S:Static
MAC ADDR
--------------------------------------------------------
The web
, Username=userpt@triple
, Username=userdot@triple
, Username=001588f80dd7@triple
D:Dynamic
MASK
request is redirected
VLAN ID PRIO
195
to the authentication
STATE
page