Portal Configuration Examples; Configuring Direct Portal Authentication - HP 3600 v2 Series Configuration Manual

Task
Display portal server statistics on a
specific interface or all interfaces.
Display TCP spoofing statistics.
Display information about portal
users on a specific interface or all
interfaces.
Clear portal connection statistics
on a specific interface or all
interfaces.
Clear portal server statistics on a
specific interface or all interfaces.
Clear TCP spoofing statistics.

Portal configuration examples

Configuring direct portal authentication

Network requirements
As shown in
The host is directly connected to the switch and the switch is configured for direct authentication. The
•
host is assigned with a public network IP address either manually or through DHCP. Before passing
portal authentication, users can access only the portal server. After passing portal authentication,
users can access Internet resources.
A RADIUS server serves as the authentication, authorization, and accounting server.
•
Figure 45 Network diagram
Host
2.2.2.2/24
Gateway：2.2.2.1/24
Figure 45:
Vlan-int100
Vlan-int2
2.2.2.1/24
192.168.0.100/24
Switch
Command
display portal server statistics { all
| interface interface-type
interface-number } [ | { begin |
exclude | include }
regular-expression ]
display portal tcp-cheat statistics
[ | { begin | exclude | include }
regular-expression ]
display portal user { all | interface
interface-type interface-number }
[ | { begin | exclude | include }
regular-expression ]
reset portal connection statistics
{all | interface interface-type
interface-number }
reset portal server statistics { all |
interface interface-type
interface-number }
reset portal tcp-cheat statistics
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
154
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Available in user view