Table of Contents
Advertisement
English
The manufacturer is not
liable
for
persons
resulting from failure to
follow
instructions
this section.
3.3
Operator Requirements
Three operators with different skills are required in
order to guarantee the appliance's safety:
User
Access to the internal part of the vending machine is
forbidden to the user.
Supply operator
The Maintenance Technician assigns the safekeeping of
the access key to the Supply operator who is in charge
of product supply, external cleaning, and starting up /
stopping of the vending machine.
The Supply operator is not
allowed
to
operations indicated in this
manual as competence of
the
Technician.
Maintenance technician
The maintenance technician is the only person
authorised
to
service
programming procedures and perform the adjustment,
set up and maintenance operations.
12
damage
to
or
property
the
safety
provided
in
carry
out
Maintenance
the
machine,
start
the
Access to the service area
is restricted to persons
having
knowledge
practical experience of the
appliance, in particular as
far as safety and hygiene
are concerned.
3.4
Safety devices
The vending machine is equipped with:
• a safety switch which cuts out the voltage to all the
inside components any time the front door is
opened.
• A microswitch blocks vending machine operation
when the drip tray is not correctly positioned. A
message indicating the incorrectly positioned part
appears on the display.
• A sensor blocks vending machine operation when
the water tank is empty. The message "Fill water
tank" is displayed.
IS
Safety switch
Maintenance technician
In case of programming or setting up operations only
the Maintenance Technician can intervene by inserting
the relevant key into the safety switch and resetting
the voltage even if the door is open.
and
Advertisement
Table of Contents
