Table of Contents
Advertisement
English
DISPLAY
2.4.14.
MDB Slave Address
0x40
2.4.15.
no change =no bills
...
2.5.
Max credit
20.00
2.6.
Multivend
no
2.7.
Overpay Time
180
2.8.
Fixed Zeroes
0
2.9.
Decimal Digits
2
2.10.
Credit Wdog
2
2.11.
Preselection
2.11.1.
Pre-selection Time
8
2.11.2.
clear pre-selection
yes
2.12.
Cash sale cmd sending
yes
2.13.
(EXE/PHD) safe mode
yes
3.
PRODUCT SETUP
...
3.1.-6
Product Before
...
3.2.
Beverage Enabling
yes
38
When the vending machine is in Master mode, this menu enables setting of the address of
any slave connected vending machine.
If the vending machine is in Slave mode, it enables setting of its address.
Possible addresses are 0x40, 0x48 and 0x50.
Default = 0x40.
Allows you to disable the bill reader if there is no change.
It allows the user to set the maximum credit which can be accepted by the vending machine.
Once this limit has been reached, the payment systems are disabled so that no more credit
can be accepted.
Default = 20.00.
Enables the user to use any residual credit to purchase other beverages.
By setting "N" (no), the residual credit will be collected by the vending machine.
It establishes the maximum time (expressed in seconds) beyond which the vending machine
collects the displayed residual credit.
The time is adjustable at intervals of 10 seconds.
Setting "000" the function is disabled.
Enables setting of the number of fixed zeros of the credit.
Enables setting of the position of the decimal point of the credit.
Enabling this option, an internal control is activated, which resets the communication with the
payment systems if the communication is blocked.
Management of pre-selection options
Pre-selection time duration (in seconds)
It enables the current pre-selection deletion by pressing any button other than sugar buttons
and by pressing the change return button of the change giver.
It enables the management of the cash sale notification command (for card reader MDB)
"safe" mode of protocol EXE/PHD.
It does not accept selling controls outside the pre-selection time of the machine.
It allows selecting the instant product for which you wish to enable powder dispensing
before water dispensing. This brewing cycle will be carried out only when the quantity of
powder to be brewed does not exceed 34.
It allows to enable or disable the beverage keys.
By pressing a disabled key during operation, the message "NOT AVAILABLE" will be
displayed.
Description
Advertisement
Table of Contents
