Saeco IPERAUTOMATICA PREMIUM D.A. 3P2016 Operation And Maintenance Manual page 27

If no password has been assigned, the programming
menu is entered directly.
If a password was assigned
to the vending machine to
enable the programming
menu, the
"PASSWORD
will appear on the display
with a flashing cursor on
the first digit.
Now the password should
be entered using the UP
and DOWN
Confirm the digit entered
by pressing the ENTER
key.
Proceed as follows to exit the programming menu and
return to standard operation of the vending machine:
• Press the CANCEL button repeatedly until "EXIT ?"
appears. Select YES and press ENTER;
• remove the key from the safety switch in order to
turn off the vending machine;
• close the door and wait for the self-configuration
process to end.
message
000000"
keys.
English
27