Table of Contents
Advertisement
English
DISPLAY
1.9.1.
Rinsing cycle
yes
1.10.
Pre-grinding
yes
1.11.
Programmable Texts
...
1.11.1.
Ready
IperAutomat
ica
1.11.2.
Preselection
Barley
beverages
1.11.3.
Brewing
Please wait
1.11.4.
Out of service
Call service
centre.
1.12.
Contrast
1.13.
Pulse counter
Coffee
1.14.
Clock
...
1.14.1.
Time
08:00
1.14.2.
Date
01/01/2008
1.14.3.
Date/time format
1.15.
Audit Msg. Enable
1.16.
Reset Enabling
no
1.17.
Free vend key
no
32
It allows enabling of the automatic rinsing of the mixing bowls.
The automatic rinsing is performed as follows: the first rinsing takes place 10 minutes after
the "machine ready" status; if necessary, other rinses occur 7 hours after the last dispensing.
Enables instant pre-grinding of the coffee dose.
It enables setting the message appearing on the display when the vending machine is in
standard operating mode.
It allows setting the message appearing on the display when the preselection mode of the
preselection key is active.
it allows setting the message appearing on the display when the vending machine is
dispensing a product.
It enables setting the text on the display when the vending machine stops due to a fault.
Adjusts the contrast of the display.
Enables selection of whether the 24 V dc electromechanical pulse counter (optional - to be
connected to the CPU card) has to count the coffees or all dispensed beverages.
Enables setting of the hour, minute, day of the week, day of the month, month and year.
Enables date and time display in US format - enables temperature display in °F
It allows displaying for a few seconds the selection counters (total and since last reset) during
the machine start-up phase.
It allows enabling of the "RESET" for data in the statistics maintenance menu.
It enables the P3 key of the CPU card for free dispensing of a product during standard
operation.
Description
Advertisement
Table of Contents
