Table of Contents
Advertisement
5.3
Label application
5.3.1
Product labels
Open the door. By using a screwdriver, unscrew the 5
screws fixing the protection carter to the door.
Remove the carter.
Unscrew the 2 screws that secure the 2 label plates
with a screwdriver.
Remove the 2 label plates.
Take out the product label sheet included in the
customer kit.
Remove the labels from the product label sheet by
following the pre-cut line.
Cut the labels as shown in the figure to make the left
ones or the right ones.
Left labels
Right labels
English
17
Advertisement
Table of Contents
