Table of Contents
Advertisement
English
Wash all components with lukewarm water and pay
particular attention not to damage the fan. Assemble
the components in reverse order and connect the
dispensing hose correctly.
10.2.4 Cleaning the Containers
Wash regularly using non abrasive detergentsand dry
with care:
• the water tank.
To clean the coffee bean hopper, follow the procedure below:
• push the moving shutter inwards;
• Brew a few coffee cups as a test, to remove the
coffee beans from the coffee grinder;
• Lift up the container and remove the bean residues
using an aspirator;
• Wash the inside of the container and dry it carefully
before reassembling it.
58
To clean an instant products container, follow the instructions below:
• Rotate the dispenser as shown in the figure.
• remove the container by lifting it upwards;
• wash the inside of the container and dry it carefully
before reassembling it;
• To reinstall the hopper proceed in reverse order,
making sure that the two retainers A are inserted
into the special slots.
Advertisement
Table of Contents
