Table of Contents
Advertisement
Getting Ready
Connecting the Terminal
Installing the Terminal
You'll need a shielded serial interface cable (fitted with a female
25-pin connector on the terminal end) to connect the terminal to
your computer or modem.
If
you plan to connect a serial printer
directly to the terminal, you'll need a second serial cable with a
male connector. (See Appendix A for connector pin
assignments.)
Place the terminal on a flat, hard surface, allowing three inches
on all sides for ventilation.
1
Press the bottom half of the power switch on the right side of
the terminal base to be sure that the terminal is turned off.
2 Plug the keyboard cable into the socket labeled KEYBOARD
on the left rear of the terminal.
KEYBOARD Socket
Advertisement
Table of Contents
